Welcome visitor you can login or create an account.

Soundproofing Mat - 1.2m by 2m by 5mm thick - 1 Tonne Pallet, 42 Rolls

Soundproofing Mat - 1.2m by 2m by 5mm thick - 1 Tonne Pallet, 42 Rolls
Soundproofing Mat - 1.2m by 2m by 5mm thick - 1 Tonne Pallet, 42 Rolls Soundproofing Mat - 1.2m by 2m by 5mm thick - 1 Tonne Pallet, 42 Rolls
Brand: Advanced Acoustics
Product Code: SPM10x42
For delivery on :
Friday 29 September order within

Availability: 10
Price: £1,305.36
Ex Tax: £1,087.80
Qty:     - OR -   Add to Wish List
Add to Compare

Dimensions - 1.2m by 2m by 5mm thick per sheet (nominal) - 10kg per square meter 42 rolls on a pallet covering a total area of 100sqm

 

A 5mm thin yet effective mineral loaded soundproofing membrane mat designed to block and reduce airbourne noise through stud walls and timber joisted floors.

Description

Please note: Soundproofing Mat is a very heavy product and larger orders may require help with offloading!

SoundProofing Mat is a heavy layer mineral loaded soundproofing mat nominally 5mm thick with excellent sound blocking qualities and will give significant sound reduction through lightweight structures when used as a sound barrier.

It is equal to lead of the same mass in effectiveness and acts as a thin de-coupling sound blocker in stud walls and timber floors. Biggest sound insulation improvements can be achieved when it is used as one layer sandwiched between two sheets of plasterboard on lightweight structures.

One layer of Soundproofing Mat has an insulation value of 28dB.
 

The above value is calculated when the sound proofing mat is hung as a curtain. It does not mean this will increase a structure by the same degree of sound proofing but simply proves that the mats are a highly efficient method of improving the sound insulation of stud walls, floors and ceilings.

Normally, a 3dB improvement is equal to a 50% loss in the volume of noise depending on where you are standing!!

Use on Walls

Soundproofing Mat is not suitable for glueing directly onto masonry or stud walls. To get the best results from this product, it should be sandwiched between two layers of high density Acoustic Plasterboard as part of a stud partition soundproofing solution as detailed above and is suitable to help reduce loud noise nuisance when used in this way.

If you are suffering from a small amount of noise, omitting loud music and bass, you may wish to look at our Basic Wall System instead of the mats.

With louder noise such as music at high volumes, we recommend using the Studio Wall System. The soundproofing mat is sandwiched between two layers of acoustic plasterboard which in turn are screwed to the bars.

Alternatively you can glue the Soundproofing Mats directly to an exisiting stud wall using our Contact Adhesive before adding more acoustic plasterboard. The additional acoustic plasterboard should be fixed immediately to hold the Soundproofing Mat securely in place and will help reduce the noise by acting as a decoupler. Normally fixed to original panels of metal, wood and plasterboard etc, this acoustic mat is a 'deadsheet’ that is particularly effective at improving the sound insulation value of timber floors and stud partitions.

Use on Floors

First ensure the floorboards are securely screwed to the floor so as not to squeak when walked over. Then use our Acoustic Sealant and fill in the joints between the floorboards and around the edge of the room making the floor is as airtight as possible. Then using our Contact Adhesive glue the layers of soundproofing mat to the timber floor. This will dramatically reduce airborne noise penetrating the floor from below or any airborne noise you create being transmitted to below but will not significantly reduce any footfall or impact noise.

PLEASE NOTE !! OUR SPECIAL AEROSOL ADHESIVE IS A CONTACT ADHESIVE. ONCE THE PRODUCT IS OFFERED UP TO THE SURFACE AND STUCK IT CANNOT BE EASILY RE POSITIONED.

Because Soundproofing Mat is produced from recycled manufacturing materials, there may sometimes be a 'rubbery’ smell when the product is first unpacked. Usually any smell will dissipate within a few days but as a precaution, we advise applying a thin layer of polythene over the insulation on walls and floors before the final covering is installed to seal in any possible smells.

Dimensions - 1.2m by 2m by 5mm thick per sheet (nominal) - 10kg per square meter 42 rolls on a pallet covering a total area of 100sqm

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: