- Isolation Booths (12)
Studio Acoustic Foam Treatment (148)
- - Acoustic Foam Panels (29)
- - 12" Acoustic Foam Tile Packs (10)
- - Acoustic Foam Tiles (40)
- - Melamine Acoustic Foam (15)
- - Bass Traps (10)
- - Acoustic Ceiling Tiles (3)
- - Acoustic Floor Tiles (3)
- - Room Analysis (1)
- - Isolation Equipment (7)
- - Acoustic Tile Kits (16)
- - Bass Trap Kits (4)
- - Starter Kits (8)
- - Installation Tools (1)
- - Diffusors (1)
- Cinema & Listening Room Acoustics (21)
- Office Acoustics (46)
- Soundproofing Products (46)
Acoustic Plasterboard 2.4m by 1.2m by 15mm
Acoustic Plasterboard is dense than standard plasterboard. It's high mass helps block and reduce sound energy giving enhanced acoustic performance to stud walls and timber joisted ceilings. Acoustic Plasterboard is a high density plasterboard that helps block noise, giving enhanced acoustic performance to stud walls and timber joisted ceilings. The plasterboard has a tapered edge so you can tape joint or dryline the joints.
PLEASE NOTE THIS PRODUCT IS NOT ENOUGH TO SOUNDPROOF A WALL OR CEILING ON ITS OWN. IT HAS TO BE USED WITH ADDITIONAL SOUNDPROOFING MATERIALS FOR BEST RESULTS.
Acoustic Plasterboard is designed for use in areas where sound reduction is of particular importance. Its high mass helps block noise and absorb sound energy, giving enhanced acoustic performance to any wall or ceiling. It complies fully with BS EN520 and is categorised as Types A, D.
Acoustic Plasterboard has a Thermal Conductivity figure of k = 0.24W/mK
Thermal Resistance: 15.0mm = 0.06m2 K/W
APPLICATIONS - High density Acoustic Plasterboard is particularly effective when applied to the underside of timber joisted ceilings, onto lightweight partition systems and when bonded to our M20 soundproofing for walls.
Price per 2.4m x 1.2m x 15mm thick sheet - £16.55 each
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: