- Acoustic Plasterboard (0)
- Isolation Booths (12)
Studio Acoustic Foam Treatment (146)
- - Acoustic Foam Panels (29)
- - 12" Acoustic Foam Tile Packs (9)
- - Acoustic Foam Tiles (39)
- - Melamine Acoustic Foam (15)
- - Bass Traps (10)
- - Acoustic Ceiling Tiles (3)
- - Acoustic Floor Tiles (3)
- - Room Analysis (1)
- - Isolation Equipment (7)
- - Acoustic Tile Kits (16)
- - Bass Trap Kits (4)
- - Starter Kits (8)
- - Installation Tools (1)
- - Diffusors (1)
- Cinema & Listening Room Acoustics (23)
- Office Acoustics (46)
- Soundproofing Products (48)
Acoustic Vent 9x9 Square
Acoustic Air Vents are a noise reducing solution to allow ventilation into music rooms, studios and band rooms without compromising the sound insulation.
It has always been difficult to devise an efficient ventilation system when designing any form of soundproofed room because any hole made through a wall will usually allow noise through. Acoustic Air Vents have been designed to allow ventilation through a wall and fitted with a very effective sound absorbing lining that substantially reduces noise penetration through the vent without reducing airflow. These Acoustic Vents are now available to obtain the maximum amount of sound control possible in any soundproofed room and are particularly useful for studios, music rooms, garage conversions, and many other instances where a degree of sound control and ventilation is required.
TAL9H&M 9x9" Acoustic Vent Set with Hit & Miss Ventilator (Up to 38dB Dn,e,w)
- Controllable air vent for background room ventilation.
- Acoustic lining reduces sound by 38dB with internal grille fully open or closed.
- Internal baffles reduce light and draughts.
- Internal hit & miss grille manually adjusted with an easy sliding action giving control over air flow.
- External baffles prevent cross cavity water transfer.
- Internal and external grilles U.V. stabilised.
- New higher equivalent area confirmed by the BRE.
- Acoustic performance tests by BRE Acoustics.
TAL9H&M- 9x9” Acoustic Air Vent Set with
Hit & Miss ventilator.
· Air brick 220mm W x 207mmH.
· Length Extends from 250mm to 404mmL.
· Width 220mm
· Louvre Grille: 238mmL x 225mmH.
· Cowl: 274mm L x 235mm H x 103mmD.
· Hit & Miss Grille: 271mm L x 247mmH.
Acoustic rating 40dB open and 41dB closed
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: