Advanced Acoustics is part of Interiors Foam LTD, Registered In England No. 04672814, Address: Unit B Maunside, Greenline Ind. Est., Mansfield, Nottinghamshire, NG18 5GU
© 2011 Advanced Acoustics
Basic Ceiling System
More Information
For more information please contact us on any of the details below;
Tel: +44 (0)1623 643609
Fax: +44 (0)1623 400661
E-Mail: enquiries@
advancedacoustics-uk.com
Our range of products includes bass traps, acoustic tiles, full room kits, isolation booths, vocal booths, drum booth, monitor and subwoofer isolation, soundproofing, installation tools and room analysis.
All of our products conform to stringent fire tests thanks to the specialist materials we use in the construction of our products.
The Basic Ceiling system uses our synthetic rubber soundblocking membrane layer sandwiched between 2 layers of our Acoustic Plasterboard.
Description
The Basic Ceiling System is designed to reduce the amount of airborne noise which penetrates poorly insulated floors. This system is unlikely to reduce any footfall or impact sound that is made on the floor above, if this is the problem please see our Studio Ceiling System and Floating Floor System.
The main product is our Soundproof Matting which utilises synthetic rubber and special fillers to produce a revolutionary barrier against airborne transmission.
This product is only 2Kg/ m² and it’s easy to handle and carry meaning work on soundproofing a ceiling can now be carried out by a single person as the roll is simple to work with making for a quick, easy, home improvement product.
Soundproof Matting is supplied in sheets 1.2m x 1.8m
The soundproof matting easily folds and bends round corners and edges to protect against flanking sound.
Not only is it versatile it boasts a very high Performance noise reduction of up to 22dB Rw for minimal thickness.
Two layers of Membrane are sandwiched between two layers of our Acoustic Plasterboard. See below.
Cross section of the thin ceiling soundproofing system showing how Acoustic Plasterboard and SoundBlocker Membrane are installed
We have created this easy to order system for you but all the products can be purchased individually from other web pages on our site.
Supplied with all the following products included;
2 x layers of Soundproof Matting (1.2m x 1.8m and 2mm thick per sheet)
Contact Adhesive (500ml cans)
Acoustic Sealant (380ml tube. 10.5 linear metres approx per tube)
2 x layers of Acoustic Plasterboard (15mm thick, 2.4m long and 1.2m wide sheets)
The system is easy to fit with little D.I.Y experience. Once ordered the products are all delivered to your door (Access Permitting) with full step by step install instructions.
We advise to always add a few extra square meter to allow for wastage from offcuts. Some materials are hard for us to calulate so please ensure you either add a few extra or work out the exact amount before ordering.
Please note: This system is effective at reducing normal noise levels, that should not usually be heard, for example talking, radio and TV sound. Loud music and bass noise will always be audible although its intensity will be reduced. To reduce louder noise please see our Studio Ceiling system.
We have done all the calculations for you so you don't have to. Just calculate the area you need to cover, add 5%, and round the figure up to a whole number, then enter that amount when you have clicked the 'Add To Cart' button and we will supply all you need to cover that area.
Price per square meter - £40.00
select your quantity on next page.
