Advanced Acoustics is part of Interiors Foam LTD, Registered In England No. 04672814, Address: Unit B Maunside, Greenline Ind. Est., Mansfield, Nottinghamshire, NG18 5GU

© 2011 Advanced Acoustics

Basic Floor System

More Information

For more information please contact us on any of the details below;

Tel: +44 (0)1623 643609

Fax: +44 (0)1623 400661

E-Mail: enquiries@
advancedacoustics-uk.com

Our range of products includes bass traps, acoustic tiles, full room kits, isolation booths, vocal booths, drum booth, monitor and subwoofer isolation, soundproofing, installation tools and room analysis.

All of our products conform to stringent fire tests thanks to the specialist materials we use in the construction of our products.

The Gold Carpet System combines a rubber chipfoam laminate and a layer of high mass rubber. These combined upgrade the sound insulation properties of your floor and work in all types of domestic properties.

Description

The Basic Floor System is designed to absorb and reduce the amount of footfall / impact sound which penetrates poorly insulated floors. The 3 layers of rubber provide very effective noise reduction for talking and airborne sound whilst the chipfoam decouples the floor and the carpet.

Perhaps one of the quickest and most effective acoustic solutions on the market, the Basic Floor System combining Quietfloor PLUS is remarkably cost-effective.

Quietfloor Plus

Using this product increases airborne sound insulation and reduces impact noise transmission so much that there is no need for the installation of false floors; this not only increases minimum ceiling height but it also reduces labour and materials costs considerably.

The laminated composition of the Quietfloor Plus provides maximum performance for minimum thickness and combines excellent sound insulation with all the qualities of a good carpet underlay.

It is quick and easy to install and is easily cut and shaped. Due to the recycled nature of the sound absorbing foam, the colour, when delivered, is unlikely to be the same as that shown in our photographs.

This product comprises a recycled layer of sound absorbing chip foam bonded to a top and bottom layer of mineral loaded soundproofing mat. The base layer of barrier mat seals and damps the sound coming through the floor, the isolated top layer of barrier mat reduces the sound penetration both ways and the sound absorbing chip foam core dramatically absorbs and reduces impact noise transfer.


In addition, Quietfloor PLUS includes an acoustic foam, which does not harden or crumble over time, unlike some other foams that are normally used in these applications. Due to the flexibility of the product, sheet sizes may vary by up to 5mm.


We have created this easy to order system for you but all the products can be purchased individually from other web pages on our site.

Supplied with the following products included;

A layer of Quietfloor PLUS Underlay - (1200 x 600 x 15mm thick) per slab

1 x Layer of Soundproofing Mats - (1.8m x 1.2m / 6ft x 4ft) per mat

Contact Adhesive (500ml cans)

Enough Jointing Tape - (33 linear metres and 50mm wide)

Enough Quietfloor Plus Perimeter Strips (1000 x 30 x 9mm thick strips)



The system is easy to fit with little D.I.Y experience and is simply laid directly on the floor. There is no need for a carpet underlay and carpet is installed directly on top of the Quietfloor PLUS.

After laying the Basic Floor System the finished floor with is ready for Carpet.

Once ordered the products are all delivered to your door (Access Permitting) with full step by step install instructions.

When delivered, this product may appear dusty. This is due to chalk used during production to stop the product sticking to each other. It will not affect the performance of the product.  However, it is advised that the dust is removed with a damp cloth before taping the joints.

Please note: This system is effective at reducing normal noise levels, that should not normally be heard, for example talking, radio and TV sound. Loud music and bass noise will always be audible although its intensity will be reduced.

We have done all the calculations for you so you don't have to.  Just calculate the area you need to cover, add 5%, and round the figure up to a whole number, then enter that amount when you have clicked the 'Add To Cart' button and we will supply all you need to cover that area.

select your quantity on next page.

Price per square meter - £60.00