Advanced Acoustics is part of Interiors Foam LTD, Registered In England No. 04672814, Address: Unit B Maunside, Greenline Ind. Est., Mansfield, Nottinghamshire, NG18 5GU
© 2011 Advanced Acoustics
Studio Wall System
More Information
For more information please contact us on any of the details below;
Tel: +44 (0)1623 643609
Fax: +44 (0)1623 400661
E-Mail: enquiries@
advancedacoustics-uk.com
Our range of products includes bass traps, acoustic tiles, full room kits, isolation booths, vocal booths, drum booth, monitor and subwoofer isolation, soundproofing, installation tools and room analysis.
All of our products conform to stringent fire tests thanks to the specialist materials we use in the construction of our products.
The Studio wall system uses a range of effective products to upgrade the sound insulation properties of party walls in the home and all types of domestic properties.
Description
The Studio Wall System is designed to absorb and reduce the amount of airborne noise which penetrates poorly insulated party walls. We have created this easy to order system for you but all the products can be purchased individually from other web pages on our site. The full installed system is up to 6 inches thick (150mm)
Supplied with all the following products included;
Rockwool Flexi-Slab (1.2m x 60cm square and 100mm thick)
Resilient Bars (3m each in length)
2 x Layers of Soundproofing Mats (1.8m x 1.2m)
Contact Adhesive (15oz 426 gram cans)
Acoustic Sealant (380ml tube. 10.5 linear metres approx per tube)
2 x layers of Acoustic Plasterboard (12.5mm thick, 2.4m long and 1.2m wide sheets)
The system can be fitted by a handyman or builder or anyone with good D.I.Y experience.
Our Rockwool Flexi-Slab is placed between 100mm timber wall battens (Not supplied) and our Resilient Bar is then screwed horizontally over the battens as seen in the picture. Acoustic Plasterboard is then offered up to the Bars followed by 2 layers of Soundproofing Mat and finally another layer of Acoustic Plasterboard. The whole system is isolated off the surrounding walls and ceiling using a thin bead of our Acoustic Sealant. This system creates a floating wall capable of reducing louder noise such as bass and loud music.
Price per square meter - £70.00
select your quantity on next page.
Once ordered the products are all delivered to your door (Access Permitting) with full step by step install instructions.
We advise to always add a few extra square meter to allow for wastage from offcuts. Some materials are hard for us to calulate so please ensure you either add a few extra or work out the exact amount before ordering.
Please note: If you are after a thinner system then please look at our Basic Wall System.
We have done all the calculations for you so you don't have to. Just calculate the area you need to cover, add 5%, and round the figure up to a whole number, then enter that amount when you have clicked the 'Add To Cart' button and we will supply all you need to cover that area.
