Welcome visitor you can login or create an account.

Tecsound 50 High Performance Soundproofing Mat 1.2m x 6m

Tecsound 50 High Performance Soundproofing Mat 1.2m x 6m
Product Code: T50
For delivery on :
Tuesday 21 November order within

Availability: 3
Price: £60.00
Ex Tax: £50.00
Qty:     - OR -   Add to Wish List
Add to Compare

Dimensions - 1.22m by 6m and 2.5mm thick (nominal) 5kg/m2

DESCRIPTION

TECSOUND T50 is a high density polymer-based, asphalt-free, synthetic soundproofing membrane, that offers good acoustic insulation in different building elements. It is equipped with a tissue non-tissue polypropylene fleece on its upper side to improve the tear strength of the membrane and at the same time offer a protection or a finishing.

ADVANTAGES

High acoustic insulation, combined with soft, flexible elements.
Great elongation capacity.
Easy handling and adaptable to uneven surfaces.
Good bonding to most of the types of surfaces.
Cold- and heat-resistance.
Excellent ageing resistance.
Rotproof.

APPLICATION

Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal, DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence problems of the TECSOUND sheet to the rendering.

Installation of the membrane: prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry according to the instructions of the adhesive manufacturer before bonding the two surfaces.  Pressure must be exerted on all the points to ensure correct adherence.

It could be installed mechanically fastened. The number of fixings will depend on the product, the support and the system where the membrane will be applied.

Installation of the membrane on metal decks: Extend the roll over the substrate progressively, trying to keep the fleece remained on the upper side so it protects the membrane. The membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the deck profile. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.

Laps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small openings can reduce the level of acoustic insulation required.

Yield: 1 m2 of membrane covers approximately 0.90 m2 of surface area, including overlaps.

INSTALLATION

Substrate: TECSOUND SY lends itself to all types of normal building substrates (renderings, gypsum board, metal, DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence problems of the TECSOUND sheet to the rendering.

Installation of the membrane: Remove the protective silicone release paper, and align the membrane on the substrate, exerting pressure over the whole membrane to ensure good bonding. If the length of product is very large, or it is applied in rolls, remove the protective release paper progressively to aid installation.

Installation of the membrane on metal decks: The membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the fretwork. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.

Laps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small openings can reduce the level of acoustic insulation required.
Yield: 1 m2 of membrane covers approximately 0.95 m2 of surface area, including overlaps.

REGULATIONS

In accordance with the following norms: CTE-DB-HR, EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 and EN ISO 717/1/2. · Quality System in accordance with ISO:9001

TECHNICAL SPECIFICATIONS

 

 

Density

2000kg/m3

Plegability

-20oC

Tensile Strength

= 150 x150

Elongation

= 200 x 200 %

Compressive Strength

4.84

Vapour Water Resistant Factor

µ = 4.15·104

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: