- Isolation Booths (12)
Studio Acoustic Foam Treatment (154)
- - Acoustic Foam Panels (31)
- - 12" Acoustic Foam Tile Packs (11)
- - Acoustic Foam Tiles (41)
- - Melamine Acoustic Foam (17)
- - Bass Traps (10)
- - Acoustic Ceiling Tiles (3)
- - Acoustic Floor Tiles (3)
- - Isolation Equipment (7)
- - Acoustic Tile Kits (16)
- - Bass Trap Kits (4)
- - Starter Kits (8)
- - Installation Tools (1)
- - Discounted Items (2)
- Cinema & Listening Room Acoustics (17)
- Office Acoustics (46)
- Soundproofing Products (49)
Quiet Panel - Panel Size - 1.2m x 1.2m
Panel Size - 1.2m x 1.2m - £83.00 each
Quiet Panel is a new recycled rubber laminate soundproofing board for use on party walls. It has been designed to be used to upgrage existing party walls where space is limited to help reduce sound transmission and noise for neighbours. The QuietPanel Thin Wall Soundproofing System has been introduced to upgrade existing walls with very limited space to help reduce sound transmission and noise from neighbours. It can be applied to either masonry or stud walls and is also suitable to reduce flanking noise up and down walls from floor to floor. The QuietPanel System will not totally soundproof a party wall but has been introduced to help those that cannot fit thicker, more efficient wall soundproofing systems.
The QuietPanel Thin Wall Soundproofing System has been developed to upgrade existing walls with very limited space to reduce sound transmission and noise from neighbours. It can be applied to either masonry or stud walls and is also suitable to reduce flanking noise up and down walls. It is also a proved solution to upgrade walls that have failed a pre-completion test. Meets Part E of the Building Regulations. Extra slim composition means little compromise on living space with high performance.
The QuietPanel Acoustic Wall System is easy to install and available for fast delivery nationwide. For shipping reasons there is a min order of 5 panels per delivery.
Composition 15mm noise stopping layer laminated to 12.5mm non-flammable, high density sound blocking acoustic panel.
Board Size: 1.2m x 1.2m
Weight: 24.7kg each
Part E Requirement: 43dB
QuietPanel Performance: 44dB
Note. These panels are produced with the sound insulation slightly short of the edges of the acoustic plasterboard and they are not as shown in the photos above. This is normal and does not affect the sound insulation these panels have been tested to provide. Acoustic Sealant must be used around the perimeter to ensure compliance.
Please note: This sound insulation is effective at reducing normal noise levels that should not normally be heard, for example talking, radio and TV sound. Loud music, loud noise and bass noise will always be audible although its intensity will be reduced. To reduce loud noise and bass or vibration please see our thicker Studio wall System.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: