- Isolation Booths (12)
Studio Acoustic Foam Treatment (155)
- - Acoustic Foam Panels (31)
- - 12" Acoustic Foam Tile Packs (12)
- - Acoustic Foam Tiles (42)
- - Melamine Acoustic Foam (16)
- - Bass Traps (10)
- - Acoustic Ceiling Tiles (3)
- - Acoustic Floor Tiles (3)
- - Isolation Equipment (7)
- - Acoustic Tile Kits (16)
- - Bass Trap Kits (4)
- - Starter Kits (8)
- - Installation Tools (1)
- - Discounted Items (2)
- Cinema & Listening Room Acoustics (17)
- Office Acoustics (46)
- Soundproofing Products (58)
Soundproofing Mat - 1.2m by 2m by 5mm thick - 10kg Membrane
10kg Soundproofing Mat
1.2m wide by 2m long by 5mm thin
What Are The Benefits?
Our 10kg Soundproofing Mat is a flexible 5mm thin mineral loaded soundproofing mat which is designed to block and reduce airborne noise through stud walls and timber joisted floors and ceilings. It is equal to Lead of the same mass in effectiveness and acts as a thin de-coupling sound blocker in stud walls and timber floors. The biggest sound insulation can be achieved when one layer is sandwiched between two sheets of plasterboard on lightweight structures.
One layer of Soundproofing Mat has an insulation value of 29dB. This value is calculated when the soundproofing mat is hung a curtain. The Soundproofing Mat will not offer the same amount of sound isolation when used in a timber wall or timber floor structure but simply proves that these 10kg Soundproofing Mats are a highly effective method of sound insulation of stud walls, timber floors and ceilings.
Normally a 3dB improvement is equal to a 50% loss in the volume of noise, depending on where you are standing.
For Use On Walls.
Soundproofing Mat is not suitable for gluing directly onto masonry or stud walls. To get the best results from this product, it should be sandwiched between two layers of high density Acoustic Plasterboard as part of a stud partition soundproofing solution as detailed above and is suitable to help reduce loud noise nuisance when used in this way.
For Use On Floors
What Are The Technical Details?
|Product Name||10kg Soundproofing Mat|
|Product Size||1.2m x 2m (nominal)|
|Area Covered Per Roll||2.4sqm|
|Product Weight||10kg/m2 (24kg per roll)|
|Hardness||76 (Durometer Shore A, 1 sec dwell)|
|Tensile Strength||1.2mpA (JISK6251)|
|Elongation At Break||>100% (JISK6251)|
|Dimensional Stability||2% (4hr @ 100oC)|
|Surface Tension||>44 dynes/cm|
|Flamability||<80 mm/min (FMVSS 302)|
(Airborne Sound Insulation) -
to ISO R140 Free Hanging Curtain
|100Hz||20 R (dB)|
|Price Per Roll||£38.88 inc. VAT|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: