Column2 1ft x 2ft Acoustic Studio Foam Panel media thumbnails
Column4 1ft x 2ft Acoustic Studio Foam Panel
Column4 1ft x 2ft Acoustic Studio Foam Panel

Column2 1ft x 2ft Acoustic Studio Foam Panel

€32,95

Tax includedShipping calculated at checkout

Colour: Dark Grey
 
 

In stock!

  • 1ft (305mm) by 2ft (610mm), 6" (150mm) thick
  • CNC cut Semi-circle profile
  • Always in stock, shipped uncompressed
  • Perfect for Live Room

Fast Shipping

Stress Free

100% Eco-friendly

packaging

30 Day Money Back
Guarantee

Advanced Acoustics Column2 1ft x 2ft Acoustic Foam Treatment Panel

The Advanced Acoustics Column2 is a 150mm open-cell polyurethane acoustic foam panel in a precision CNC-cut semi-circular profile, measuring 305mm × 610mm (1ft × 2ft). The semi-circular cross-section — a half-cylinder attached flat side to the wall — gives the Column2 a curved surface area of 0.29m² per panel against a wall footprint of 0.18m², increasing effective acoustic surface area by approximately 57% relative to a flat panel of the same footprint.

At 150mm, the Column2 is the deepest foam panel in the Advanced Acoustics range, providing substantially stronger low-frequency absorption than flat slab panels. The 150mm depth places it firmly in the high-performance tier for low-frequency treatment. Available in Mid Grey and Dark Grey. Manufactured in the UK.

Jump to: Applications • Product Benefits • Installation • FAQs • Technical Details

Applications

Recording studios and home studios — deep low-frequency treatment.
At 150mm depth, the Column2 provides low-frequency absorption that flat 25–100mm panels cannot match. The additional foam depth begins to address the low-frequency room modes and bass build-up that are the most difficult acoustic problems to treat with standard panel depths. Install at primary reflection points and in corners where low-frequency energy accumulates. The semi-circular profile creates a visually distinctive wall installation that differs significantly from standard flat panel treatment.

Corners and edges — curved profile for architectural integration.
The semi-circular cross-section suits installations at wall junctions and edges where the curved face integrates naturally with the geometry of the room. Columns can be installed vertically along wall-ceiling junctions or wall-wall corners, treating the surfaces most prone to low-frequency bass build-up while creating a structured, intentional visual feature.

Custom and statement acoustic installations.
The Column2 profile is well suited to acoustic installations where visual impact is a consideration alongside performance. The curved semi-circular face is distinctive from flat slab and profiled tile formats, and panels can be wrapped in open-weave fabric to create finished fabric column panels in any colour. Panels can be combined with flat Acousti-Slab panels or 12" tiles to create mixed-format wall treatments.

Product Benefits

150mm depth — deep low-frequency absorption.
The 150mm foam depth is the greatest of any panel in the Advanced Acoustics range. Foam absorption effectiveness increases with depth at lower frequencies — a 150mm panel addresses frequency ranges that 25–100mm flat panels treat partially or not at all. The Column2 is appropriate where deep broadband absorption, particularly at low-mid frequencies, is the primary acoustic requirement.

Semi-circular profile — increased surface area, distinctive visual result.
The CNC-cut semi-circular cross-section gives the Column2 a curved surface area approximately 57% greater than its wall footprint, providing more acoustic surface per unit of wall space than a flat panel of equivalent dimensions. The profile produces a three-dimensional column form on the wall surface — visually distinct from flat panel and tile formats — and can be fabric-wrapped for a finished appearance.

Specification and compliance.
30kg/m³ foam density. Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989). Panel size 305mm × 610mm × 150mm (1ft × 2ft × 6"). 0.18m² (2sqft) footprint per panel. Mid Grey and Dark Grey. Manufactured in the UK and shipped uncompressed from stock.

Installation

Apply Advanced Acoustics High Strength Contact Adhesive to the flat rear face of the panel and the wall surface. Apply a band of adhesive around the perimeter of the flat face and 50–75% coverage of the remaining surface area; repeat on the wall. Allow to become touch-dry before bringing surfaces together — contact adhesive bonds on contact, so position the panel carefully before pressing it to the wall. The adhesive is solvent-based; ensure adequate ventilation throughout installation.

For a demountable installation, fix D-rings to the flat rear face of the panel and hang from picture hooks. This allows panels to be removed and repositioned without damage to the wall surface.

Frequently Asked Questions

 

Why choose a Column over a flat Acousti-Slab?

Depth and look. The Column is 150mm deep against 100mm for the deepest Acousti-Slab, and its semi-circular profile gives about 57% more surface area than a flat panel of the same footprint. It also costs more per m² of wall. Choose the Column for the deeper profile and the sculpted wall, and the Acousti-Slab for value.

Should I choose the Column2 or the Column4?

Both are 150mm deep with the same profile. The Column2 is 610mm long and the Column4 is 1220mm. The Column4 works out cheaper per m² of wall. The Column2 suits short runs, gaps and finishing off an arrangement. The Column4 suits full-height or large wall installations.

Is the pack of 8 cheaper than buying singles?

Yes. The pack of 8 is priced below 8 single panels of the same size. Buy singles if you want a smaller number or a mix of the two lengths.

How much room do Columns take up?

Each panel is 150mm (6") deep, so panels on two opposite walls take 300mm off the width of the room. In a small room, allow for that before ordering.

What if my room still doesn't sound right after fitting the tiles?

All products carry a 30-day money-back guarantee. If the improvement is less than you expected, the cause is usually placement or coverage rather than the product. Contact us with your room dimensions and a photo and we'll advise on layout before you decide whether to return anything. Call 01623 643609 or email info@advancedacoustics-uk.com.

 

The Technical Details

 

Product Name Column2 Panel 12" x 24"
Product Size 12" x 24" x 6" (305mm x 610mm x 150mm)
Area Covered Per Panel 2sqft (0.18sqm)
Product Colour Mid Grey or Dark Grey
Product Weight
Fire Classification Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989)
Acoustic Foam Density 30kg/m3

To quickly find out the shipping cost for your order simply add the required items to your cart. Place your cursor over the cart icon at the top of the page. Click on "Calculate Cart Shipping". Select your country and region and enter your postcode. The shipping rate will be displayed. If your country is not listed please contact us for a shipping quote.

UK Shipping Charges For Most Products

Orders with a value of £0.00 to £54.99 have a £7.00 carriage charge with tracked next working day delivery.

Orders with a value of 55.00 to £99.99 have a £12.00 carriage charge with tracked next working day delivery.

Orders with a value of £100.00 or more qualify for free next day shipping.

Excluded Items

For carts which contain Plasterboard, Soundproofing Mat, SilentBoard, QuietPanel, Silent Floor Ultra, M20 and R10 the following charges apply

£8.00 carriage for the first item and £4.00 carriage for every item added up to a maximum charge of £75.00.

Some soundproofing items have a minimum order due to shipping constraints.

Bulk Products have a £75.00 pallet charge per item.

Returns

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Non-returnable items:- Made to order items such as our Office Acoustic Panels and High End Audio Acoustic Panels, Gift cards.

To complete your return, we require a receipt or proof of purchase. Please contact us for your return authorisation number. Once your return is received and inspected, we will send you an email to notify you that we have received your returned item.

Exchanges

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@advancedacoustics-uk.com and send your item to: Advanced Acoustics LTD, Unit B, Maunside, Green Line Industrial Estate, Mansfield, NG18 5GU, United Kingdom.