Advanced Acoustics 2" Tegular Acoustic Foam Suspended Ceiling Tile Pack
The Advanced Acoustics Tegular 2" Suspended Ceiling Tile is a 54mm open-cell polyurethane acoustic foam tile with a plain face and 45-degree bevel cut on all four sides, measuring 595mm × 595mm — the standard suspended ceiling grid dimension. The tile achieves NRC 0.95 (Sound Absorption Class B), providing high-performance broadband absorption across the mid and high frequency range. Each pack contains 6 tiles, covering 2.16m² of ceiling surface. Absorption: 0.51 at 250Hz, 1.01 at 500Hz, 1.12 at 1kHz, 1.09 at 2kHz, and 1.15 at 4kHz.
The tile is designed to drop directly into an existing suspended ceiling grid in place of standard ceiling tiles, providing acoustic treatment without structural modification to the ceiling. The Tegular profile produces a clean, grid-like pattern with a defined joint line between tiles. Available in Mid Grey and Dark Grey. Manufactured in the UK.
Jump to: Calculator • Applications • Product Benefits • Installation • FAQs • Technical Details
Need Help Working Out Quantities?
Tegular 2" Acoustic Ceiling Tile Calculator
Applications
Recording studios and control rooms — ceiling plane treatment.
The ceiling plane is a primary reflection surface in recording and control rooms, and treating it addresses the reflections that would otherwise reach the recording and monitoring position from above. The Tegular 2" provides Class B broadband absorption at the ceiling plane, complementing wall tile treatment. The drop-in format allows the ceiling to be treated without removing or modifying the existing grid.
Product Benefits
NRC 0.95 / Sound Absorption Class B — high-performance broadband absorption.
The 54mm foam core achieves NRC 0.95 (Class B), with absorption of 0.51 at 250Hz, 1.01 at 500Hz, 1.12 at 1000Hz, 1.09 at 2000Hz, and 1.15 at 4000Hz. The 1.01 at 500Hz delivers strong lower-mid frequency performance. Where stronger low-frequency absorption is required at the ceiling plane, the Tegular 3" Suspended Ceiling Tile (0.73 at 250Hz) provides Class A performance at greater depth.
Drop-in suspended ceiling format — 595mm × 595mm.
The 595mm × 595mm dimension matches the standard suspended ceiling grid module, allowing the tile to drop directly into an existing grid in place of standard ceiling tiles. No structural modification to the ceiling is required. The Tegular profile — a plain flat face with a 45-degree bevel cut on all four sides — produces a clean, grid-like pattern consistent with a suspended ceiling installation.
Specification and compliance.
30kg/m³ foam density. Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989). Tile size 595mm × 595mm × 54mm. 6 tiles per pack, 2.16m² coverage. 11kg per pack. Mid Grey and Dark Grey. Manufactured in the UK and shipped uncompressed from stock.
Installation
The Tegular 2" Suspended Ceiling Tile is designed to drop directly into an existing standard suspended ceiling grid in place of the existing ceiling tiles. No adhesive is required; the tile is held in place by the grid. Due to the weight of the tiles (11kg per pack), increasing the number of wire supports supporting the ceiling grid is recommended to accommodate the additional load.
Frequently Asked Questions
Should I choose the 2" or the 3" Tegular tile?
Both reach NRC 0.95, and from 500Hz upwards they measure within 0.07 of each other. The difference is at 250Hz, where the 3" absorbs 0.73 against 0.51 for the 2". That extra low-mid absorption lifts the 3" to Class A (the 2" is Class B). The 3" is also heavier, at 12.5kg per pack against 11kg, and costs more per pack. For general echo and reverberation control, the 2" is usually enough. Choose the 3" for control rooms, live rooms, drum rooms and other spaces where low-mid build-up is part of the problem.
Will my existing ceiling grid take the weight?
Each 2" Tegular tile weighs about 1.8kg (11kg per pack of 6). The tiles drop into the grid with no adhesive, but the grid and its wire supports need to carry the extra load. We recommend adding wire supports, and the grid manufacturer or an installer can confirm the load rating of your system. If you're replacing a large area, get the grid checked before you order.
I already have acoustic ceiling tiles. Will these make a noticeable difference?
Compare the NRC on your current tile's datasheet with the figures on this page. If your ceiling is plasterboard, metal or vinyl-faced tile, expect a large improvement. If it already has acoustic tiles, the gain depends on how well they absorb now, so check their frequency figures against the Technical Details below before deciding.
Do the Tegular tiles sit in the grid like a standard ceiling tile?
Not quite. A standard flat tile rests on top of the grid, whereas the Tegular tiles sit through it, and the bevelled edge gives a defined joint line between tiles. If you want a flat tile that sits on the grid in the usual way, the Mel-Acoustic Ceiling Tile does that, and it is the Class '0' option.
What if the tiles don't make enough difference once they're in?
All products carry a 30-day money-back guarantee. If the room is still too lively, the usual cause is coverage rather than the product: too few tiles for the size of the space. Contact us with your room dimensions and your current ceiling type and we'll advise on how much more to add before you decide whether to return anything. Call 01623 643609 or email info@advancedacoustics-uk.com.
The Technical Details
| Product Name | Tegular 2" Acoustic Suspended Ceiling Tile Pack |
| Product Size | 595mm x 595mm x 54mm |
| Tiles Per Pack |
6 |
| Area Covered Per Pack | 2.16sqm |
| Sound Absorption Class | B |
| Noise Reduction Coefficient |
0.95 |
| Absorption at 250Hz | 0.51 |
| Absorption at 500Hz | 1.01 |
| Absorption at 1000Hz | 1.12 |
| Absorption at 2000Hz | 1.09 |
| Absorption at 4000Hz | 1.15 |
| Product Colour | Mid Grey or Dark Grey |
| Product Weight | 11kg |
| Fire Classification | Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989) |
| Acoustic Foam Density | 30kg/m3 |
Performance Data
