F . A . T . 12" Acoustic Studio Foam Tile Pack media thumbnails
F . A . T . 12" Acoustic Studio Foam Tile Pack
F . A . T . 12" Acoustic Studio Foam Tile Pack
3D
F . A . T . 12" Acoustic Studio Foam Tile Pack
F . A . T . 12" Acoustic Studio Foam Tile Pack
F . A . T . Acoustic Studio Foam Tile Pack

F . A . T . 12" Acoustic Studio Foam Tile Pack

€42,95

Tax includedShipping calculated at checkout

Colour: Mid Grey

In stock!

  • Precision cut convoluted acoustic tiles
  • 305mm x 305mm by 40mm thick
  • 24 tiles per box covering 2.23sqm
  • NRC - 0.55
  • Always in stock, shipped uncompressed
  • Perfect for Broadcast Studios & Vocal Booths

Fast Shipping

Stress Free

100% Eco-friendly

packaging

30 Day Money Back
Guarantee

12" F.A.T. Acoustic Foam Tile Pack

The Advanced Acoustics F.A.T. 12" is a 40mm open-cell polyurethane acoustic foam tile in a precision cut egg-crate profile, measuring 305 × 305mm. F.A.T. stands for Fundamental Acoustic Treatment — the egg-crate profile is one of the original and most widely recognised acoustic foam formats, characterised by the alternating peak-and-valley surface that gives the tile its distinctive appearance.

The tile achieves NRC 0.55 (Sound Absorption Class D), providing effective absorption across the mid and high frequency range. Each pack contains 24 tiles, covering 2.23m² (24ft²) of wall or ceiling surface. Absorption increases with frequency: 0.21 at 250Hz, 0.46 at 500Hz, 0.66 at 1kHz, 0.80 at 2kHz, and 1.08 at 4kHz. Available in Mid Grey. Manufactured in the UK.

Jump to: Calculator • Applications • Product Benefits • Installation • FAQs • Technical Details

Need Help Working Out Quantities?

12” F.A.T. Acoustic Tile Calculator

Notes: For Control Rooms it is vital that the wall that has the control desk placed on it is entered as the Room Width even if this is the longest wall. Available Corners refers to the amount of wall to wall corners that are available for bass traps. There must be at least 350mm of free space on either wall for it to qualify.
Applications

Podcast studios and broadcast environments — high-frequency echo control.
Podcast and broadcast studios require effective control of high-frequency reflections and flutter echo to produce clean, clear microphone recordings. The F.A.T. 12" provides effective absorption from 1kHz upward — 0.66 at 1kHz, 0.80 at 2kHz, 1.08 at 4kHz — targeting the frequency range most responsible for the reflective quality of untreated rooms. The large 2.23m² coverage per pack makes it efficient to treat the wall areas behind and beside the recording position. Use the Coverage Calculator tab to determine the number of packs required.

Vocal booths and isolation rooms.
Vocal booths require effective high-frequency absorption to prevent the tight, boxy sound caused by excessive reflections in a small enclosed space. The F.A.T. 12" provides effective absorption at the frequencies most critical for vocal recording — 1kHz and above — reducing the coloration introduced by room reflections and producing a cleaner vocal capture. The 40mm profile is suited to vocal booths where wall space is limited and a thinner tile is preferred to maximise usable room volume.

Home studios and recording spaces — entry-level acoustic treatment.
For home studios where the primary acoustic problem is high-frequency flutter echo and reverberation, the F.A.T. 12" provides effective entry-level treatment in the classic egg-crate format. The profile is the original acoustic foam tile shape — widely used in professional studios for decades — and remains an effective and cost-efficient option for home recording environments. Install on the primary reflection points — side walls, rear wall, and ceiling — to achieve even absorption coverage throughout the room.

Rehearsal rooms and live rooms — high-frequency control.
Rehearsal rooms benefit from controlled high-frequency reverberation to reduce the build-up of reflected sound energy that makes it difficult for musicians to hear each other clearly. The F.A.T. 12" provides effective absorption at the higher frequencies most responsible for this build-up. The large coverage per pack makes it efficient to treat the wall areas of a rehearsal room at a lower cost per m² than thicker profiles.

Mixing and mastering rooms — supplementary high-frequency treatment.
In mixing and mastering environments where low-frequency room treatment is already addressed by bass traps, the F.A.T. 12" can be used to supplement high-frequency absorption on wall and ceiling surfaces. The absorption above 1kHz reduces the influence of high-frequency reflections on the monitoring position without the additional cost of thicker tiles where low-frequency absorption is not the primary requirement.

Product Benefits

NRC 0.55 / Sound Absorption Class D — effective high-frequency absorption.
The 40mm egg-crate foam core achieves NRC 0.55 (Class D), with absorption increasing with frequency: 0.21 at 250Hz, 0.46 at 500Hz, 0.66 at 1000Hz, 0.80 at 2000Hz, and 1.08 at 4000Hz. The egg-crate profile achieves a slightly lower NRC than wedge profiles at the same nominal thickness — the void space between peaks means the average effective depth across the tile face is less than the 40mm peak measurement, which accounts for the difference in absorption performance relative to a continuous wedge cut of the same height.

Egg-crate profile — classic F.A.T. format, precision cut for consistent dimensions.
The egg-crate profile — peaks and valleys alternating across the tile face — is the original acoustic foam tile format and one of the most recognisable shapes in studio acoustic treatment. Each tile is cut using precision machinery to ensure consistent peak height and valley depth across every tile in the pack, producing a uniform appearance across the installed surface.

High-density polyurethane foam — 30kg/m³, fire rated.
The foam core is manufactured at 30kg/m³ density, providing greater structural integrity and longer service life than lower-density acoustic foam. Higher density foam maintains its shape and acoustic performance over time without the compression and degradation that affects lower-density products. The foam meets Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989).

24 tiles per pack — 2.23m² coverage.
Each pack contains 24 tiles at 305 × 305mm, providing 2.23m² (24ft²) of coverage. Use the Coverage Calculator tab to determine the number of packs required for your room dimensions and room type before ordering.

Available in Mid Grey.
The F.A.T. 12" is available in Mid Grey. Shipped uncompressed from stock to maintain tile integrity in transit.

Made in the UK — shipped uncompressed.
All F.A.T. 12" packs are manufactured in the Advanced Acoustics UK facility and shipped uncompressed, ensuring tiles arrive in full-dimension condition ready for installation.

Installation

Plan the tile layout before beginning installation. Sketch the intended pattern on paper and mark the layout on the wall or ceiling surface using pencil, masking tape, or a laser level. Distribute tiles evenly across the treatment area rather than concentrating them in a single large cluster; even distribution provides more consistent absorption coverage across the room.

Apply Advanced Acoustics Contact Adhesive to both the back of the tile and the mounting surface. Apply a band of adhesive around the perimeter of the tile and 50–75% coverage of the remaining surface area; repeat the equivalent coverage on the wall. Allow the adhesive to become touch-dry before bringing the surfaces together — contact adhesive bonds on contact, so position the tile carefully before pressing it to the wall. Avoid overspray onto the tile face or surrounding wall surface; use masking tape on the wall to protect adjacent areas. If adhesive webbing contacts the tile face, allow it to dry fully before attempting to remove it — in most cases it can be peeled away cleanly once dry. The adhesive is solvent-based. Ensure adequate ventilation throughout the installation — keep doors and windows open.

For a temporary or demountable installation, mount tiles onto 6mm MDF or plywood sheet to create panels, then hang the panels using D-rings and picture hooks. For ceiling-mounted panels, use four mirror plates per panel. This approach allows panels to be removed and repositioned without damage to the wall or ceiling surface.

 

Frequently Asked Questions

 

Why choose the F.A.T. over a Wedge?

The F.A.T. (Fundamental Acoustic Treatment) is the classic egg-crate profile, NRC 0.55 (Class D). The Wedge is slightly stronger (NRC 0.60), costs slightly less per m², and comes in Mid Grey and Dark Grey, whereas the F.A.T. comes in Mid Grey only. Choose the F.A.T. for the egg-crate look. For the best absorption per pound, take the Wedge.

My room sounds boomy. Will tiles fix it?

Tiles mainly absorb mid and high frequencies, which cures echo, flutter and harshness. Boom is low-frequency energy that collects in the corners, and tiles do little about it. Add corner bass traps for that, or start with a Studio Starter Kit, which pairs tiles with bass traps.

Will the tiles stop sound getting in or out of my room?

No. Acoustic foam absorbs sound inside the room, which reduces echo and reverberation. It doesn't block sound passing through walls, floors or ceilings. Stopping noise travelling between spaces needs mass and decoupling, such as Mass Loaded Vinyl and acoustic plasterboard. Sort that first if it's your main problem, then use the tiles to improve how the room sounds.

I'm renting. Can the tiles come off without damaging the walls?

Contact adhesive is a permanent bond, so expect marks on the wall and possible damage to the tile if it's removed. For a removable installation, mount the tiles on 6mm MDF or plywood to make panels and hang them with D-rings and picture hooks. For ceiling panels, use four mirror plates per panel.

What if my room still doesn't sound right after fitting the tiles?

All products carry a 30-day money-back guarantee. If the improvement is less than you expected, the cause is usually placement or coverage rather than the product. Contact us with your room dimensions and a photo and we'll advise on layout before you decide whether to return anything. Call 01623 643609 or email info@advancedacoustics-uk.com.

The Technical Details

 

Product Name F.A.T. 12" Acoustic Tile Pack
Product Size 12" x 12" x 2 1/4" (305mm x 305mm x 40mm)
Tiles Per Pack
24
Area Covered Per Pack 24sqft (2.23sqm)
Sound Absorption Class D
Noise Reduction Coefficient
0.55
Absorption at 250Hz 0.21
Absorption at 500Hz 0.46
Absorption at 1000Hz 0.66
Absorption at 2000Hz 0.80
Absorption at 4000Hz 1.08
Product Colour Mid Grey
Product Weight
Fire Classification Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989)
Acoustic Foam Density 30kg/m3

 

Performance Data

F.A.T. Standard Acoustic Foam Tile Pack

To quickly find out the shipping cost for your order simply add the required items to your cart. Place your cursor over the cart icon at the top of the page. Click on "Calculate Cart Shipping". Select your country and region and enter your postcode. The shipping rate will be displayed. If your country is not listed please contact us for a shipping quote.

UK Shipping Charges For Most Products

Orders with a value of £0.00 to £54.99 have a £7.00 carriage charge with tracked next working day delivery.

Orders with a value of 55.00 to £99.99 have a £12.00 carriage charge with tracked next working day delivery.

Orders with a value of £100.00 or more qualify for free next day shipping.

Excluded Items

For carts which contain Plasterboard, Soundproofing Mat, SilentBoard, QuietPanel, Silent Floor Ultra, M20 and R10 the following charges apply

£8.00 carriage for the first item and £4.00 carriage for every item added up to a maximum charge of £75.00.

Some soundproofing items have a minimum order due to shipping constraints.

Bulk Products have a £75.00 pallet charge per item.

Returns

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Non-returnable items:- Made to order items such as our Office Acoustic Panels and High End Audio Acoustic Panels, Gift cards.

To complete your return, we require a receipt or proof of purchase. Please contact us for your return authorisation number. Once your return is received and inspected, we will send you an email to notify you that we have received your returned item.

Exchanges

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@advancedacoustics-uk.com and send your item to: Advanced Acoustics LTD, Unit B, Maunside, Green Line Industrial Estate, Mansfield, NG18 5GU, United Kingdom.