Advanced Acoustics 3ft Quadrant Bass Trap 12" x 12"
The Advanced Acoustics Quadrant Corner Bass Trap 3ft is a 915mm open-cell polyurethane acoustic foam bass trap in a precision CNC-cut quadrant profile, measuring 305mm × 305mm × 915mm (12" × 12" × 36"). The bass trap is designed for corner installation — vertical orientation in wall-wall corners and horizontal orientation in wall-ceiling corners — where low-frequency energy accumulates. The 3ft length is a modular unit that can be installed singly or stacked to build the required corner coverage.
Equivalent Absorption Area per object: 0.2 at 50Hz, 0.4 at 63Hz, 0.3 at 80Hz, 0.6 at 100Hz, 0.7 at 125Hz, and 0.9 at 160Hz. The additional length over the 2ft version delivers stronger low-frequency absorption at the top of the measured range — 0.9 at 160Hz versus 0.7 for the 2ft. The quadrant profile — a quarter-circle cross-section designed to fit the internal geometry of a room corner — pairs with the AeroFoil 12" tile family, allowing the bass trap to be installed alongside AeroFoil wall tiles for a coordinated acoustic treatment with a consistent visual finish across walls and corners. Available in Mid Grey and Dark Grey. Manufactured in the UK.
Jump to: Calculator • Applications • Product Benefits • Installation • FAQs • Technical Details
Need Help Working Out Quantities?
3ft Quadrant Bass Trap Calculator
Applications
Professional recording studios and control rooms — corner low-frequency control.
The Quadrant Corner Bass Trap 3ft addresses the low-frequency standing waves and bass build-up that wall and ceiling tiles do not effectively control. Install vertically in the wall-wall corners and horizontally in the wall-ceiling corners — the locations where low-frequency energy is greatest. The 3ft length is a modular unit: use a single trap where targeted treatment is required, or stack multiple traps to build the full corner coverage needed for the room. The 915mm length covers more of the corner per piece than the 2ft version, reducing the number of stacked modules required for a given corner height. Pair with AeroFoil wall tiles for a coordinated treatment package. Use the Coverage Calculator to determine the number of bass traps required.
Rehearsal rooms and live rooms — low-frequency control.
Rehearsal and live rooms with significant low-frequency energy from bass instruments and drums benefit from the 3ft trap's stronger low-frequency absorption. The 0.9 at 160Hz and 0.7 at 125Hz address the low-frequency build-up that contributes to muddiness in musical performance, controlling the low-end energy that wall tiles leave unaddressed.
Coordinated treatment with AeroFoil family tiles.
The quadrant profile of the bass trap pairs with the AeroFoil 12" tile family, allowing the bass trap to be installed as part of a coordinated acoustic treatment package with a consistent visual finish across walls and corners. The matching profile produces a unified aesthetic across the full installation.
Product Benefits
Corner low-frequency control — Equivalent Absorption Area 0.9 at 160Hz.
The Quadrant Corner Bass Trap 3ft provides targeted absorption at the low frequencies that wall and ceiling tiles do not effectively address. Equivalent Absorption Area per object: 0.2 at 50Hz, 0.4 at 63Hz, 0.3 at 80Hz, 0.6 at 100Hz, 0.7 at 125Hz, and 0.9 at 160Hz. The additional length over the 2ft version delivers stronger absorption at the top of the measured range — 0.9 at 160Hz versus 0.7 for the 2ft. The 3ft is the appropriate specification where stronger low-frequency absorption is required or where fewer stacked modules are preferred for a given corner height.
Quadrant profile — corner-fitting geometry.
The CNC-cut quadrant profile — a quarter-circle cross-section — is designed to fit the internal geometry of a room corner, producing a clean, curved installation that integrates with the corner structure. The profile pairs with the AeroFoil tile family for a consistent visual finish across walls and corners.
Specification and compliance.
30kg/m³ foam density. Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989). Bass trap size 305mm × 305mm × 915mm (12" × 12" × 36"). 2.8kg per trap. Mid Grey and Dark Grey. Manufactured in the UK and shipped uncompressed from stock.
Installation
Installing our Corner Foam Bass Traps is very simple. The first step to take is to work out your correct placement and preferred layout of bass traps. Do a sketch on paper first to make sure that the layout looks right and you have enough bass traps and space for your planned design.
Once the acoustic foam bass traps are mounted they are hard to remove so it is important to get the layout right before you begin. Once you have a sketch of the layout you plan you can then mark up the wall with the layout. You can either use pencil, masking tape or lasers to layout the design.
When mounting the bass traps in the corners apply Advanced Acoustics Contact Adhesive to both the back of the bass trap and the mounting surface. There is no need to heavily cover the bass trap or wall with adhesive, a band of adhesive around the perimeter of the bass trap along with 50% - 75% coverage of the rest of the bass trap will be fine. Use the same equivalent amount on the wall. Avoid overspray on the bass traps and the corners so that adhesive can’t be seen when they are in place. Masking Tape on the wall will help with this. If you do get webbing overspray on the bass trap, don’t touch it, allow it to dry, in most cases you will be able to peel the adhesive off.
The adhesive we supply is solvent based so we recommend that you keep all doors of the room and any windows open whilst completing the installation.
Frequently Asked Questions
Why choose a 3ft trap instead of stacking 2ft traps?
A 3ft trap covers 915mm of corner in one piece, so you need fewer pieces and fewer joins to reach a given height. It also measures stronger than the 2ft from 125Hz upwards (0.9 at 160Hz against 0.5–0.7) and costs slightly less per metre of corner. A 2ft trap is still useful for finishing a stack where the remaining height is too short for a 3ft.
How much will foam bass traps do for very deep bass?
Foam traps absorb progressively more as frequency rises. Per trap, Equivalent Absorption Area is 0.1–0.4 between 50Hz and 80Hz, rising to 0.5–0.9 at 160Hz depending on profile and length. Expect the clearest improvement in the upper bass and low mids, where much of the muddiness in small rooms sits. The deepest notes reduce more gradually, so they respond best to treating more corners rather than relying on one or two traps.
How heavy are the traps, and are they secure above head height?
Weights run from 1.0kg (2ft Wedge or Wave) to 2.8kg (3ft Quadrant). They are fixed with Advanced Acoustics Contact Adhesive on both the trap and the surface, which bonds on contact once touch-dry, so press each one firmly into position. For a fixing you can take down, mount the trap on MDF and hang it with mirror plates, which is the recommended method for wall–ceiling corners.
Will bass traps help with a boomy home cinema or subwoofer?
Yes, where the problem is bass building up in the room, which makes a subwoofer sound boomy or uneven from seat to seat. Corners are where that energy is strongest, so trapping the front and rear corners reduces the boom and evens out the bass. Traps won't change how much bass reaches the next room, and they don't treat dialogue clarity. Wall tiles or panels handle the mid and high frequencies.
What if my room still sounds boomy after fitting the traps?
All products carry a 30-day money-back guarantee. If the bass is less improved than you expected, the usual cause is coverage rather than the product: too few traps, or corners left untreated. Send us your room dimensions and a photo and we'll advise on layout before you decide whether to return anything. Call 01623 643609 or email info@advancedacoustics-uk.com.
The Technical Details
| Product Name | Quadrant Corner Bass Trap 3ft |
| Product Size | 12" x 12" x 36" (305mm x 305mm x 915mm) |
| Equivalent Absorption Area Per Object at 50Hz | 0.2 |
| Equivalent Absorption Area Per Object at 63Hz | 0.4 |
| Equivalent Absorption Area Per Object at 80Hz | 0.3 |
| Equivalent Absorption Area Per Object at 100Hz | 0.6 |
| Equivalent Absorption Area Per Object at 125Hz | 0.7 |
| Equivalent Absorption Area Per Object at 160Hz | 0.9 |
| Product Colour | Mid Grey or Dark Grey |
| Product Weight | 2.8kg |
| Fire Classification | Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989) |
| Acoustic Foam Density | 30kg/m3 |
Performance Data
