Advanced Acoustics 3" Tegular Acoustic Foam Suspended Ceiling Tile Pack
The Advanced Acoustics Tegular 3" Suspended Ceiling Tile is a 75mm open-cell polyurethane acoustic foam tile with a plain face and 45-degree bevel cut on all four sides, measuring 595mm × 595mm — the standard suspended ceiling grid dimension. The tile achieves NRC 0.95 (Sound Absorption Class A), providing high-performance broadband absorption across the mid and high frequency range with strong low-mid performance. Each pack contains 6 tiles, covering 2.16m² of ceiling surface. Absorption: 0.73 at 250Hz, 0.98 at 500Hz, 1.05 at 1kHz, 1.13 at 2kHz, and 1.13 at 4kHz. The additional depth over the 2" version moves the tile up to Sound Absorption Class A as a result of the improved low-frequency performance — 0.73 at 250Hz versus 0.51 for the 2". The tile is designed to drop directly into an existing suspended ceiling grid in place of standard ceiling tiles. Available in Mid Grey and Dark Grey. Manufactured in the UK.
Jump to: Calculator • Applications • Product Benefits • Installation • FAQs • Technical Details
Need Help Working Out Quantities?
Tegular 3" Acoustic Ceiling Tile Calculator
Applications
Recording studios and control rooms — Class A ceiling plane treatment.
The ceiling plane is a primary reflection surface in recording and control rooms. The Tegular 3" provides Class A broadband absorption at the ceiling plane, with the 0.73 at 250Hz delivering stronger low-mid frequency control than the 2" version. The drop-in format allows the ceiling to be treated without removing or modifying the existing grid.
Product Benefits
NRC 0.95 / Sound Absorption Class A — strong broadband absorption with Class A low-frequency performance.
The 75mm foam core achieves NRC 0.95 (Class A), with absorption of 0.73 at 250Hz, 0.98 at 500Hz, 1.05 at 1000Hz, 1.13 at 2000Hz, and 1.13 at 4000Hz. The 0.73 at 250Hz delivers strong low-mid frequency absorption — an improvement over the 2" version (0.51 at 250Hz) — which moves the tile up to Class A. The 3" is the appropriate specification where low-mid frequency absorption at the ceiling plane is part of the acoustic requirement.
Drop-in suspended ceiling format — 595mm × 595mm.
The 595mm × 595mm dimension matches the standard suspended ceiling grid module, allowing the tile to drop directly into an existing grid in place of standard ceiling tiles. No structural modification to the ceiling is required. The Tegular profile produces a clean, grid-like pattern consistent with a suspended ceiling installation.
Specification and compliance.
30kg/m³ foam density. Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989). Tile size 595mm × 595mm × 79mm. 6 tiles per pack, 2.16m² coverage. 12.5kg per pack. Mid Grey and Dark Grey. Manufactured in the UK and shipped uncompressed from stock.
Installation
The Tegular 3" Suspended Ceiling Tile is designed to drop directly into an existing standard suspended ceiling grid in place of the existing ceiling tiles. No adhesive is required; the tile is held in place by the grid. Due to the weight of the tiles (12.5kg per pack), increasing the number of wire supports supporting the ceiling grid is recommended to accommodate the additional load.
Frequently Asked Questions
Is the 3" Tegular worth the extra over the 2"?
It depends on what the room needs. From 500Hz upwards the two tiles perform almost identically. What you pay extra for is low-mid absorption: 0.73 at 250Hz against 0.51 for the 2". If the room sounds boomy or muddy, or it houses a drum kit, live band or monitoring position, the 3" is the right choice. If the aim is simply to cut echo and reverberation, the 2" does the same job for less and puts slightly less load on the ceiling grid.
Both Tegular tiles show NRC 0.95, so why is the 3" Class A and the 2" Class B?
NRC is a single rounded average across four frequency bands, so tiles that behave differently at low frequencies can land on the same figure. The Sound Absorption Class reflects how evenly the tile absorbs across the range. The 3" holds up better at 250Hz (0.73 against 0.51), which is what places it in Class A. When comparing the two, look at the frequency figures in the Technical Details rather than the NRC alone.
I don't have a suspended ceiling. Can I still use these?
These tiles are made to drop into a standard 600mm ceiling grid, so they suit rooms that already have one. If your ceiling is solid or plasterboard, use our 12" Tegular Acoustic Studio Foam Tile Pack, which has a bevelled profile and is fixed to the ceiling with contact adhesive. For a demountable fixing, a ceiling-mounted acoustic panel is the alternative.
Will my existing ceiling grid take the weight?
Each 3" Tegular tile weighs about 2.1kg (12.5kg per pack of 6), making it the heavier of the two Tegular tiles. The tiles drop into the grid with no adhesive, but the grid and its wire supports need to carry the extra load. We recommend adding wire supports, and the grid manufacturer or an installer can confirm the load rating of your system. If you're replacing a large area, get the grid checked before you order.
What if the tiles don't make enough difference once they're in?
All products carry a 30-day money-back guarantee. If the room is still too lively, the usual cause is coverage rather than the product: too few tiles for the size of the space. Contact us with your room dimensions and your current ceiling type and we'll advise on how much more to add before you decide whether to return anything. Call 01623 643609 or email info@advancedacoustics-uk.com.
The Technical Details
| Product Name | Tegular 3" Acoustic Suspended Ceiling Tile Pack |
| Product Size | 595mm x 595mm x 79mm |
| Tiles Per Pack |
6 |
| Area Covered Per Pack | 2.16sqm |
| Sound Absorption Class | A |
| Noise Reduction Coefficient |
0.95 |
| Absorption at 250Hz | 0.73 |
| Absorption at 500Hz | 0.98 |
| Absorption at 1000Hz | 1.05 |
| Absorption at 2000Hz | 1.13 |
| Absorption at 4000Hz | 1.13 |
| Product Colour | Mid Grey or Dark Grey |
| Product Weight | 12.5kg |
| Fire Classification | Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989) |
| Acoustic Foam Density | 30kg/m3 |
Performance Data
