PRO Wall Independent Soundproofing System

Best For

  • Stud party walls and separating walls where loud airborne noise is the primary concern — music, shouting, loud voices, or higher general disturbance
  • Brick party walls and solid walls where a resilient independent lining is required

Application

  • Wall soundproofing — residential properties where noise levels are higher and direct-bonded systems are insufficient

System Depth

  • Approximately 80mm overall build-up from the existing wall face

Availability

  • Usually In Stock

Notes

  • Fixings are not supplied — source locally to suit your wall type (stud or brick); electrical sockets and switches must only be removed and reinstated by a qualified electrician

Use the Soundproofing System Calculator below to enter your area and get the correct quantities — then simply add everything to your cart.

Fast Shipping

Stress Free

100% Eco-friendly

packaging

30 Day Money Back
Guarantee

Maximum Performance for Loud Noise Through Separating Walls

Our Pro Wall Soundproofing System is designed for more demanding noise problems, helping to reduce loud airborne noise such as music, shouting and higher levels of general disturbance through separating walls. Suitable for both stud walls and brick walls, this system uses a resilient MuteClip and MuteClip Channel framework to isolate the new wall lining from the existing structure, then adds high-mass layers to further improve sound reduction.

To make things easier, our online calculator works out the quantities required for your project, with an additional 5% already allowed for waste.

Independent Clip & Channel Wall System for Higher Noise Levels

Our Pro Wall Soundproofing System is a step up from direct-bonded wall upgrades and is intended for situations where you need a more robust solution for loud airborne noise. By using a clip and channel system, the new wall lining is resiliently mounted, helping reduce the mechanical transfer of sound through the structure. The system then adds mass using acoustic plasterboard and 10kg MLV.

The build-up consists of:

  • MuteClip Isolation Clips fixed to the existing wall
  • MuteClip Channel fitted horizontally into the clips
  • First layer of 15mm Acoustic Plasterboard fixed to the channel
  • 10kg MLV (Soundproofing Mat) bonded to the plasterboard with joints taped
  • Second layer of 15mm Acoustic Plasterboard with staggered joints
  • AC95 Acoustic Sealant at all perimeters
  • PVC Jointing Tape at MLV joints
  • Contact Adhesive for bonding MLV to plasterboard

The finished build-up is approximately 80mm overall from the existing wall face.

Important Supply Information

All soundproofing materials required for this system are supplied by us as part of the calculator output. Fixings are not supplied but can be sourced locally to suit your specific wall type and site conditions.

How the System Works

This system improves sound insulation using a combination of isolation and mass:

  • MuteClips and MuteClip Channel create a resiliently mounted framework that isolates the new lining from the existing wall, reducing the mechanical transfer of sound through the structure
  • Two layers of 15mm Acoustic Plasterboard add mass and form the finished wall lining, with staggered joints to minimise sound leakage
  • 10kg MLV adds dense mass between the plasterboard layers to improve airborne sound reduction, particularly for music and bass-heavy noise
  • AC95 Acoustic Sealant seals perimeter gaps and weak points to maintain airtightness
  • PVC Jointing Tape seals MLV joints to prevent sound leakage at seams

This makes the system well suited to reducing music, shouting, loud voices and other higher-level airborne noise through separating walls.

What We Supply

The system calculator works out the estimated quantities required for all soundproofing materials we supply, including:

  • MuteClip Isolation Clips
  • MuteClip Channel
  • 15mm Acoustic Plasterboard — 2 layers
  • 10kg MLV (Soundproofing Mat) — 1 layer
  • High Strength Contact Adhesive
  • AC95 Acoustic Sealant
  • PVC Jointing Tape

We also include an additional 5% allowance for waste in the calculated quantities.

What You Need to Source Separately

You will also need fixings suitable for your wall type (stud or brick). These are not supplied by us but can be sourced from most local builders merchants. See the Fixings Required section on this page for the specific types needed.

Your Soundproofing System Calculator

 


Key Benefits

  • Maximum performance wall soundproofing for loud airborne noise — MuteClip isolation, 10kg MLV, and dual acoustic plasterboard combine to deliver the highest level of sound reduction available in our wall range
  • Resilient clip and channel isolation — MuteClips and MuteClip Channel create a decoupled framework that reduces the mechanical transfer of sound through the wall structure, a key advantage over direct-bonded systems
  • Suitable for stud and brick walls — the clip and channel system works on both stud party walls and solid brick separating walls, with installation method adapted to suit the wall type
  • 10kg MLV for dense mass — a single layer of 10kg mass loaded vinyl is bonded between the plasterboard layers to add significant mass and improve airborne sound reduction, particularly for music and bass
  • Two layers of 15mm Acoustic Plasterboard — double-layer plasterboard with staggered joints adds mass and rigidity to the finished wall lining
  • Recommended where direct-bonded systems are insufficient — this system is a step up from the Essential and Plus wall systems and is suited to higher noise levels and more demanding situations
  • Built-in 5% waste allowance — calculator quantities include a 5% overage to reduce the risk of under-ordering on site


Important Notes 

  • This system is suitable for both stud and brick walls, but installation method and fixings will vary depending on the surface
  • It is intended primarily for airborne sound reduction
  • Fixings are not included or supplied by us
  • Sealant quantities are an approximation only and should be treated as a guide
  • The calculator is provided as a guide only, and final quantities should always be checked before ordering
  • This system is more advanced than our Essential and Plus wall systems and is recommended for those with more advanced DIY / construction experience
  • Electrical sockets and switches should only be removed and reinstated by a qualified electrician


Fixings Required 

  • MuteClip direct to wall – Hammer Fix Plug & Screw
  • MuteClip to stud frame – 5mm x 60mm Wood Screw
  • 1st plasterboard layer to channel – 32mm Fine Thread Drywall Screw
  • 2nd plasterboard layer to channel – 50mm Fine Thread Drywall Screw
  • MuteClip Channel overlap – 20mm Steel Self-Tapping Screw


Installation Summary 

Installation involves:

  1. Preparing the existing wall and ensuring it is sound and free from defects
  2. Marking out and fixing MuteClips in the correct positions for your wall type
  3. Fitting MuteClip Channel horizontally into the clips (including correct overlap where required)
  4. Installing the first layer of 15mm Acoustic Plasterboard, leaving a small perimeter gap
  5. Sealing the perimeter with AC95 Acoustic Sealant
  6. Bonding the 10kg MLV to the plasterboard using contact adhesive and taping joints
  7. Installing the second layer of 15mm Acoustic Plasterboard, staggering joints where possible
  8. Sealing the perimeter again with AC95 Acoustic Sealant before finishing
  9. The completed wall can then be skimmed or tape and jointed ready for decoration.

For a more detailed installation guide click here.


Calculator Disclaimer 

This calculator is intended as a guide only. Advanced Acoustics will not be held responsible for any decisions made as a result of using this calculator.