A.M.I PRO Speaker Isolation Pads Studio Foam SLOPED media thumbnails
A.M.I PRO Speaker Isolation Pads Studio Foam
A.M.I PRO Speaker Isolation Pads Studio Foam
A.M.I PRO Speaker Isolation Pads Studio Foam

A.M.I PRO Speaker Isolation Pads Studio Foam SLOPED

€36,95

Tax includedShipping calculated at checkout

In stock!

  • Sloped design enhances audio projection.
  • Decouple monitors for improved sound quality.
  • Durable foam construction for reliable performance.

Fast Shipping

Stress Free

100% Eco-friendly

packaging

30 Day Money Back
Guarantee

Advanced Acoustics A.M.I. Speaker Isolation Pads - Sloped

The Advanced Acoustics A.M.I PRO Speaker Isolation Pads (Sloped) are precision cut foam isolation pads designed to decouple studio monitors from the desk, console bridge, or shelf surface they rest on while angling the monitor toward the listening position. Each pack contains 4 pads, providing isolation for 2 monitors. Each pad measures 355mm × 115mm (14" × 4½"), tapering from 25mm at one end to 45mm at the other (1" to 1¾"), and is rated at 250N foam hardness.

The sloped profile angles the monitor tweeter toward ear level — the pad orientation determines the direction of tilt: narrow end to the rear angles the monitor upward, suited to monitors sitting below ear level; narrow end to the front angles the monitor downward, suited to monitors sitting above ear level such as on a meter bridge or high shelf. Available in Black. Manufactured in the UK.

Jump to: Applications • Product Benefits • Installation • FAQs • Technical Details

Applications

Studio monitors — desk isolation with adjustable angle.
When studio monitors sit on a desk surface below ear level, the tweeter axis points below the listening position. Placing the pads with the narrow end to the rear raises the back of the monitor, angling the tweeter upward toward ear level. When monitors are positioned above ear level — on a meter bridge, high shelf, or speaker stand — reversing the pad orientation (narrow end to the front) angles the tweeter downward toward the listening position. In both configurations, the compliant foam layer interrupts the vibration path between the monitor cabinet and the surface, reducing vibration coupling and resonances that affect low-frequency accuracy at the monitoring position.

Home studios and broadcast environments — angle correction and isolation.
In home studio and broadcast environments where monitors sit on desks or lower surfaces relative to the listening position, the Sloped pads provide both vibration isolation and tweeter angle correction in a single pad. Where the monitor tweeter is already at ear level or a level platform is preferred, the A.M.I PRO Flat pads are the appropriate alternative.

Product Benefits

Vibration decoupling with upward angle — 25mm to 45mm taper.
The A.M.I PRO Sloped pad tapers from 25mm at the front to 45mm at the rear, angling the monitor downward toward the listening position. Reversing them will angle the monitor upward toward the listening position. The compliant foam at both ends provides isolation from the supporting surface, with the 250N foam hardness specified to support studio monitor loads without fully compressing at either end of the taper. The angle correction and vibration isolation are delivered in a single pad without the need for separate isolation and angling accessories.

4 pads per pack — sufficient for 2 monitors.
Each pack contains 4 pads, providing 2 pads per monitor. Place the two pads side by side under each monitor, orientating both in the same direction to produce a consistent angle across the monitor base. The 355mm × 115mm footprint suits most studio monitor bases.

Installation

Place the two pads side by side under each monitor. Orient both pads with the narrow (25mm) end toward the rear for an upward angle — suited to monitors sitting below ear level. Reverse the orientation with the narrow end toward the front for a downward angle — suited to monitors sitting above ear level. No adhesive or fixings are required — the weight of the monitor holds the pads in position. Ensure the monitor sits stably on both pads and the angle is appropriate for the listening position before use.

Frequently Asked Questions

 

How much tilt do the Sloped pads give?

The pad rises 20mm over its 355mm length (from 25mm to 45mm), which is a gentle tilt of about 3 degrees. That's enough to nudge the tweeters toward ear level on a desk, but it won't aim a monitor sharply at you. For a larger angle you would need a monitor stand.

How do I know whether my monitors need angling?

Sit at your normal listening position and look at the tweeters. If they point below your ears, which is typical for monitors on a desk, tilt them up. If they point above your ears, as on a meter bridge or high shelf, tilt them down. If they're already level with your ears, the Flat pads are the better choice.

My monitors are large and heavy. Are the pads suitable?

The pads are made for studio monitors, and the 250N foam is specified to support monitor loads without fully compressing at either end of the taper. If your monitors are unusually large or heavy, contact us with the model and we'll confirm they're suitable. For subwoofers and heavy cabinets, look at the Anti-Vibration Isolation Pad in the same range.

Will the pads stop sound travelling through the desk or floor to other rooms?

No. They reduce vibration from the monitor into the desk, which helps with desk rattle and resonance, but they aren't soundproofing. Airborne sound from the speakers still passes through walls, floors and ceilings. To reduce noise reaching other rooms, see our soundproofing products, such as Mass Loaded Vinyl.

What if I don't notice a difference?

All products carry a 30-day money-back guarantee. If the pads haven't helped, the cause is often the desk or the room rather than the monitor mounting. Contact us with a description of your setup and we'll advise before you decide whether to return anything. Call 01623 643609 or email info@advancedacoustics-uk.com.

The Technical Details

 

Product Name A.M.I PRO Isolation Pads - Sloped
Product Size 14" x 4 1/2" (355mm x 115mm)
Platform Thickness 1" - 1 3/4" (25mm - 45mm)
Pads Per Pack 4 Pads (Enough for 2 speakers)
Product Weight
Product Colour Black
Foam Hardness 250N
Fire Classification Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989)

To quickly find out the shipping cost for your order simply add the required items to your cart. Place your cursor over the cart icon at the top of the page. Click on "Calculate Cart Shipping". Select your country and region and enter your postcode. The shipping rate will be displayed. If your country is not listed please contact us for a shipping quote.

UK Shipping Charges For Most Products

Orders with a value of £0.00 to £54.99 have a £7.00 carriage charge with tracked next working day delivery.

Orders with a value of 55.00 to £99.99 have a £12.00 carriage charge with tracked next working day delivery.

Orders with a value of £100.00 or more qualify for free next day shipping.

Excluded Items

For carts which contain Plasterboard, Soundproofing Mat, SilentBoard, QuietPanel, Silent Floor Ultra, M20 and R10 the following charges apply

£8.00 carriage for the first item and £4.00 carriage for every item added up to a maximum charge of £75.00.

Some soundproofing items have a minimum order due to shipping constraints.

Bulk Products have a £75.00 pallet charge per item.

Returns

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Non-returnable items:- Made to order items such as our Office Acoustic Panels and High End Audio Acoustic Panels, Gift cards.

To complete your return, we require a receipt or proof of purchase. Please contact us for your return authorisation number. Once your return is received and inspected, we will send you an email to notify you that we have received your returned item.

Exchanges

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@advancedacoustics-uk.com and send your item to: Advanced Acoustics LTD, Unit B, Maunside, Green Line Industrial Estate, Mansfield, NG18 5GU, United Kingdom.