Elevate Your Studio Acoustics with the Wave Bass Trap Corner Kit
The Advanced Acoustics Wave Corner Bass Trap Kit is a complete tri-corner treatment package combining three Wave Corner Bass Traps 3ft with one complimentary Bass Trap Corner Fill. The three 3ft Wave Bass Traps measure 305mm × 305mm × 915mm (12" × 12" × 36"); the Bass Trap Corner Fill measures 305mm × 305mm × 305mm (12" × 12" × 12").
The Wave Corner Bass Trap Kit provides the components to treat one tri-corner fully in a single purchase. The Bass Trap Corner Fill cube seats in the tri-corner — the junction where two walls and the ceiling meet — and the three 3ft Bass Traps run off from the cube in the three directions, along the two wall edges and the ceiling edge that converge at the tri-corner.
Equivalent Absorption Area per object (combined): 0.4 at 50Hz, 1.2 at 63Hz, 1 at 80Hz, 2 at 100Hz, 1.9 at 125Hz, and 2.1 at 160Hz. The Wave profile pairs with the Mini Wave 12" tile family, allowing the kit to be installed alongside Mini Wave wall tiles for a coordinated acoustic treatment package. Available in Mid Grey and Dark Grey. Manufactured in the UK.
What's Included
3 × Wave Corner Bass Traps 3ft — 305mm × 305mm × 915mm (12" × 12" × 36").
1 × Bass Trap Corner Fill — 305mm × 305mm × 305mm (12" × 12" × 12").
Jump to: Applications • Product Benefits • Installation • FAQs • Technical Details
Applications
Professional recording studios and control rooms — tri-corner treatment.
The Wave Corner Bass Trap Kit treats one tri-corner fully. The tri-corner is the point of greatest low-frequency energy accumulation in a room, and the kit provides the components to address it comprehensively. Pair with Mini Wave wall tiles for a coordinated treatment package. Use the Coverage Calculator to determine the number of kits required — most rooms have four tri-corners, so four kits treat all four comprehensively.
Rehearsal rooms and live rooms — tri-corner low-frequency control.
The kit's combined Equivalent Absorption Area — 2 at 100Hz, 1.9 at 125Hz, and 2.1 at 160Hz — addresses the low-frequency build-up that contributes to muddiness in musical performance. Treating the tri-corners first establishes the foundation for the rest of the acoustic treatment.
Coordinated treatment with Wave family tiles.
The Wave profile of the bass traps pairs with the Mini Wave 12" tile family, allowing the kit to be installed alongside Mini Wave wall tiles for a coordinated acoustic treatment package with a consistent visual finish across walls, corners, and tri-corners.
Product Benefits
Complete tri-corner treatment — cube in the tri-corner, three 3ft traps running off in three directions.
The Wave Corner Bass Trap Kit provides the components to treat one tri-corner fully in a single purchase. The Bass Trap Corner Fill cube seats in the tri-corner junction, and the three 3ft Bass Traps run off from the cube in the three directions — along the two wall edges and the ceiling edge that converge at the tri-corner.
Wave profile — matching Mini Wave tile family aesthetic.
The Wave profile of the bass traps pairs with the Mini Wave 12" tile family, allowing the kit to be installed as part of a coordinated acoustic treatment package with a consistent visual finish across walls, corners, and tri-corners.
Specification and compliance.
30kg/m³ foam density. Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989). 3ft bass trap size 305mm × 305mm × 915mm (12" × 12" × 36"). Corner Fill size 305mm × 305mm × 305mm (12" × 12" × 12"). 3 × 3ft traps + 1 × Corner Fill per kit. Mid Grey and Dark Grey. Manufactured in the UK and shipped uncompressed from stock.
Installation
Installing our Corner Foam Bass Traps is very simple. The first step to take is to work out your correct placement and preferred layout of bass traps. Do a sketch on paper first to make sure that the layout looks right and you have enough bass traps and space for your planned design.
Once the acoustic foam bass traps are mounted they are hard to remove so it is important to get the layout right before you begin. Once you have a sketch of the layout you plan you can then mark up the wall with the layout. You can either use pencil, masking tape or lasers to layout the design.
When mounting the bass traps in the corners apply Advanced Acoustics Contact Adhesive to both the back of the tile and the mounting surface. There is no need to heavily cover the bass trap or wall with adhesive, a band of adhesive around the perimeter of the bass trap along with 50% - 75% coverage of the rest of the bass trap will be fine. Use the same equivalent amount on the wall. Avoid overspray on the bass traps and the corners so that adhesive can’t be seen when they are in place. Masking Tape on the wall will help with this. If you do get webbing overspray on the bass trap, don’t touch it, allow it to dry, in most cases you will be able to peel the adhesive off.
The adhesive we supply is solvent based so we recommend that you keep all doors of the room and any windows open whilst completing the installation.
Frequently Asked Questions
Is the kit better value than buying the parts separately?
Yes. The kit costs less than buying the three 3ft traps and a Corner Fill individually, and it arrives as one matched set sized to treat a complete tri-corner. Choose individual traps instead if you want a different mix of lengths or are building a corner a piece at a time.
If I only buy one kit, which corner should it go in?
Fit it in one of the ceiling tri-corners at the speaker end of the room, where low-frequency energy tends to build up most. A typical rectangular room has four ceiling tri-corners, so four kits treat all of them. You don't need to buy them all at once but ideally you would install them in pairs. Add kits as budget allows, working from the front of the room back.
How much will foam bass traps do for very deep bass?
Foam traps absorb progressively more as frequency rises. Per trap, Equivalent Absorption Area is 0.1–0.4 between 50Hz and 80Hz, rising to 0.5–0.9 at 160Hz depending on profile and length. Expect the clearest improvement in the upper bass and low mids, where much of the muddiness in small rooms sits. The deepest notes reduce more gradually, so they respond best to treating more corners rather than relying on one or two traps.
Do I need acoustic tiles as well as bass traps?
For a complete treatment, yes. Bass traps control low-frequency build-up in the corners. Tiles control the mid and high frequency reflections off the walls and ceiling that cause echo and flutter. A room with traps only can still have a harsh, echoey top end. Our Studio Starter Kits combine both in one purchase.
What if one kit doesn't make enough difference?
All products carry a 30-day money-back guarantee. One kit treats one tri-corner, and most rooms have several, so the improvement grows as you treat more corners. If it hasn't helped enough, contact us with your room dimensions and we'll advise on where to add treatment before you consider a return. Call 01623 643609 or email info@advancedacoustics-uk.com.
The Technical Details
| Product Name | Wave Corner Bass Trap Kit |
| Kit Contents |
3No. 3ft Wave Bass Traps 1No. Bass Trap Corner Fill |
| Equivalent Absorption Area Per Object at 50Hz | 0.4 |
| Equivalent Absorption Area Per Object at 63Hz | 1.2 |
| Equivalent Absorption Area Per Object at 80Hz | 1.0 |
| Equivalent Absorption Area Per Object at 100Hz | 2.0 |
| Equivalent Absorption Area Per Object at 125Hz | 1.9 |
| Equivalent Absorption Area Per Object at 160Hz | 2.1 |
| Product Colour | Mid Grey or Dark Grey |
| Product Weight | 5.6kg |
| Fire Classification | Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989) |
| Acoustic Foam Density | 30kg/m3 |
Performance Data
