Column4 1ft x 4ft Acoustic Studio Foam Panel media thumbnails
Column4 1ft x 4ft Acoustic Studio Foam Panel
Column4 1ft x 4ft Acoustic Studio Foam Panel

Column4 1ft x 4ft Acoustic Studio Foam Panel

€52,95

Tax includedShipping calculated at checkout

Colour: Dark Grey
 
 

In stock!

  • 1ft (305mm) by 4ft (1220mm), 6" (150mm) thick
  • CNC cut Semi-circle profile
  • Always in stock, shipped uncompressed
  • Ideal for rehearsal Studios

Fast Shipping

Stress Free

100% Eco-friendly

packaging

30 Day Money Back
Guarantee

Advanced Acoustics Column4 1ft x 4ft Acoustic Foam Treatment Panel

  

The Advanced Acoustics Column4 is a 150mm open-cell polyurethane acoustic foam panel in a precision CNC-cut semi-circular profile, measuring 305mm × 1220mm (1ft × 4ft). The semi-circular cross-section gives the Column4 a curved surface area of 0.58m² against a wall footprint of 0.37m² — approximately 57% more acoustic surface area than a flat panel of the same footprint.

At 150mm, the Column4 is the deepest foam panel in the Advanced Acoustics range, providing substantially stronger low-frequency absorption than flat slab panels. The Column4 is the longer format in the column range; the Column2 (1ft × 2ft) is available where a shorter panel is required. Available in Mid Grey and Dark Grey. Manufactured in the UK.

Jump to: Applications • Product Benefits • Installation • FAQs • Technical Details

Applications

Recording studios and home studios — deep low-frequency treatment.
The 150mm depth provides low-frequency absorption that flat 25–100mm panels cannot match. The 1ft × 4ft format covers a larger wall area per panel than the Column2, reducing the number of panels required to treat a given surface. Install at primary reflection points and wall-ceiling junctions where low-frequency energy accumulates. Use the Coverage Calculator to determine the number of panels required for your space.

Wall-height installations and vertical column treatments.
The 4ft length suits floor-to-ceiling or partial-height vertical installations where the full column profile can be displayed across a significant wall dimension. A row of Column4 panels installed vertically creates a continuous ribbed wall surface from floor to ceiling or mid-wall height, combining deep low-frequency absorption with a three-dimensional architectural aesthetic.

Custom and statement acoustic installations.
The Column4 can be fabric-wrapped in any open-weave material to create finished fabric column panels. The longer format suits large-format acoustic installations and pairs well with flat Acousti-Slab panels or 12" tiles to create mixed-format wall treatments. The semi-circular profile is visually distinctive from all flat panel formats in the range.

Product Benefits

150mm depth — deep low-frequency absorption.
The 150mm foam depth is the greatest of any panel in the Advanced Acoustics range. Foam absorption effectiveness increases with depth at lower frequencies — a 150mm panel addresses frequency ranges that 25–100mm flat panels treat partially or not at all. The Column4 is appropriate where deep broadband absorption, particularly at low-mid frequencies, is the primary acoustic requirement.

Semi-circular profile — increased surface area, distinctive visual result.
The CNC-cut semi-circular cross-section gives each panel a curved surface area of 0.58m² from a 0.37m² wall footprint — an increase of approximately 57% over a flat panel of equivalent dimensions. The profile produces a three-dimensional column form on the wall surface and can be fabric-wrapped for a finished appearance.

Specification and compliance.
30kg/m³ foam density. Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989). Panel size 305mm × 1220mm × 150mm (1ft × 4ft × 6"). 0.37m² (4sqft) footprint per panel. Mid Grey and Dark Grey. Manufactured in the UK and shipped uncompressed from stock.

Installation

Apply Advanced Acoustics High Strength Contact Adhesive to the flat rear face of the panel and the wall surface. Apply a band of adhesive around the perimeter of the flat face and 50–75% coverage of the remaining surface area; repeat on the wall. Allow to become touch-dry before bringing surfaces together — contact adhesive bonds on contact, so position the panel carefully before pressing it to the wall. The adhesive is solvent-based; ensure adequate ventilation throughout installation.

For a demountable installation, fix D-rings to the flat rear face of the panel and hang from picture hooks. This allows panels to be removed and repositioned without damage to the wall surface.

 

Frequently Asked Questions

 

Why choose a Column over a flat Acousti-Slab?

Depth and look. The Column is 150mm deep against 100mm for the deepest Acousti-Slab, and its semi-circular profile gives about 57% more surface area than a flat panel of the same footprint. It also costs more per m² of wall. Choose the Column for the deeper profile and the sculpted wall, and the Acousti-Slab for value.

Should I choose the Column2 or the Column4?

Both are 150mm deep with the same profile. The Column2 is 610mm long and the Column4 is 1220mm. The Column4 works out cheaper per m² of wall. The Column2 suits short runs, gaps and finishing off an arrangement. The Column4 suits full-height or large wall installations.

Is the pack of 8 cheaper than buying singles?

Yes. The pack of 8 is priced below 8 single panels of the same size. Buy singles if you want a smaller number or a mix of the two lengths.

Can I wrap the Columns in fabric?

Yes. The Column4 can be wrapped in any open-weave material to give a finished fabric column. Hold the fabric up to a light: if air passes freely through the weave, it won't block the absorption. Dense or tightly woven fabrics will.

What if my room still doesn't sound right after fitting the tiles?

All products carry a 30-day money-back guarantee. If the improvement is less than you expected, the cause is usually placement or coverage rather than the product. Contact us with your room dimensions and a photo and we'll advise on layout before you decide whether to return anything. Call 01623 643609 or email info@advancedacoustics-uk.com.

 

The Technical Details

 

Product Name Column4 Panel 12" x 48"
Product Size 12" x 48" x 6" (305mm x 1220mm x 150mm)
Area Covered Per Panel 4sqft (0.37sqm)
Product Colour Mid Grey or Dark Grey
Product Weight
Fire Classification Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989)
Acoustic Foam Density 30kg/m3

To quickly find out the shipping cost for your order simply add the required items to your cart. Place your cursor over the cart icon at the top of the page. Click on "Calculate Cart Shipping". Select your country and region and enter your postcode. The shipping rate will be displayed. If your country is not listed please contact us for a shipping quote.

UK Shipping Charges For Most Products

Orders with a value of £0.00 to £54.99 have a £7.00 carriage charge with tracked next working day delivery.

Orders with a value of 55.00 to £99.99 have a £12.00 carriage charge with tracked next working day delivery.

Orders with a value of £100.00 or more qualify for free next day shipping.

Excluded Items

For carts which contain Plasterboard, Soundproofing Mat, SilentBoard, QuietPanel, Silent Floor Ultra, M20 and R10 the following charges apply

£8.00 carriage for the first item and £4.00 carriage for every item added up to a maximum charge of £75.00.

Some soundproofing items have a minimum order due to shipping constraints.

Bulk Products have a £75.00 pallet charge per item.

Returns

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Non-returnable items:- Made to order items such as our Office Acoustic Panels and High End Audio Acoustic Panels, Gift cards.

To complete your return, we require a receipt or proof of purchase. Please contact us for your return authorisation number. Once your return is received and inspected, we will send you an email to notify you that we have received your returned item.

Exchanges

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@advancedacoustics-uk.com and send your item to: Advanced Acoustics LTD, Unit B, Maunside, Green Line Industrial Estate, Mansfield, NG18 5GU, United Kingdom.