Wedge PRO 12" Acoustic Studio Foam Tile Pack

The Advanced Acoustics Wedge PRO is a 75mm open-cell polyurethane acoustic foam tile in a precision-cut wedge profile, measuring 305 × 305mm. The tile achieves NRC 0.95 (Sound Absorption Class B), providing high-performance broadband absorption across the mid and high frequency range with notably stronger low-frequency performance than thinner foam profiles — 0.57 at 250Hz, rising to 0.91 at 500Hz, 1.08 at 1kHz, 1.15 at 2kHz, and 1.14 at 4kHz. Each pack contains 24 tiles, covering 2.23m² (24ft²) of wall or ceiling surface — the largest coverage per pack in the 12" tile range.

The 75mm wedge profile is the deepest tile in the Advanced Acoustics 12" range. The additional foam depth compared to 50–55mm profiles extends effective absorption further into the low-mid frequency range, making the Wedge PRO the appropriate specification where low-frequency reverberation control is required alongside mid and high frequency absorption. Available in Mid Grey and Dark Grey. Manufactured in the UK.

Applications

Recording studios and control rooms — broadband absorption including low-mid frequencies. The 75mm Wedge PRO at NRC 0.95 (Class B) provides effective absorption across a broader frequency range than thinner tiles, with 0.57 at 250Hz providing meaningful low-mid frequency control in addition to the strong mid and high frequency absorption. Install on the primary reflection points — side walls, rear wall, and ceiling — to achieve even absorption coverage throughout the room. The Wedge PRO is the recommended tile specification for control rooms where low-mid frequency reverberation is a problem alongside higher frequency echo. Use the Coverage Calculator tab to determine the number of packs required for your room dimensions and type.

Drum rooms and rehearsal spaces. Drum rooms present a particularly demanding acoustic environment — high sound pressure levels across a wide frequency range, with significant low-mid frequency energy from kick drum and toms. The 75mm Wedge PRO provides greater low-mid frequency absorption than thinner tiles, reducing the build-up of low-mid frequency energy that makes drum rooms difficult to record in and uncomfortable to play in. The large 305 × 305mm tile format and 2.23m² coverage per pack makes it efficient to treat the large wall areas typical of drum rooms and rehearsal spaces.

Live rooms and production studios. Live rooms used for recording full bands or amplified instruments require effective broadband absorption to control reverberation across the full frequency range of the instruments being recorded. The 75mm Wedge PRO provides Class B absorption from 250Hz upward, making it appropriate for live rooms where a range of instruments — including bass guitar, electric guitar, and drums — are recorded simultaneously. The large coverage per pack reduces the number of packs required to treat a full live room.

Mixing and mastering rooms — critical listening environments. Accurate monitoring in a mixing or mastering environment requires a controlled acoustic environment with consistent, predictable reverberation characteristics across the full frequency range. The 75mm Wedge PRO provides Class B absorption with stronger low-frequency performance than thinner tiles, reducing the influence of low-mid frequency room modes on the monitoring position and improving the accuracy of the listening environment.

Vocal booths and isolation rooms. The NRC 0.95 performance of the 75mm Wedge PRO provides effective absorption at the frequencies most critical for vocal recording — 1kHz and above — as well as improved low-mid frequency control compared to thinner profiles. The additional low-mid absorption reduces the proximity effect and room coloration that can affect vocal recordings in small enclosed spaces, producing a cleaner, more neutral vocal capture.

Product Benefits

NRC 0.95 / Sound Absorption Class B — broadband absorption with stronger low-frequency performance. The 75mm wedge foam core achieves NRC 0.95 (Class B), with absorption across the full measured frequency range: 0.57 at 250Hz, 0.91 at 500Hz, 1.08 at 1000Hz, 1.15 at 2000Hz, and 1.14 at 4000Hz. Class B is a higher absorption classification than Class C, and the 0.57 at 250Hz represents significantly better low-frequency performance than 50–55mm tiles — making the Wedge PRO the appropriate specification where low-mid frequency reverberation control is required alongside mid and high frequency absorption.

75mm wedge profile — deepest tile in the 12" range. The 75mm depth is the greatest foam thickness in the Advanced Acoustics 12" tile range. Greater foam depth provides a longer acoustic path length for sound to travel through the material, improving absorption at lower frequencies where shorter foam profiles are less effective. The wedge profile distributes the foam depth across the tile surface, providing effective absorption across the full tile face.

High-density polyurethane foam — 30kg/m³, fire rated. The foam core is manufactured at 30kg/m³ density, providing greater structural integrity and longer service life than lower-density acoustic foam. Higher density foam maintains its shape and acoustic performance over time without the compression and degradation that affects lower-density products. The foam meets Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989).

Large format — 2.23m² coverage per pack. Each pack of 24 tiles at 305 × 305mm provides 2.23m² (24ft²) of coverage — the largest coverage per pack in the 12" tile range. The larger tile format and higher coverage per pack reduces the number of packs and fixing points required to treat a given wall area, making the Wedge PRO efficient to install in larger rooms such as drum rooms, live rooms, and rehearsal spaces.

Two colourways — Mid Grey and Dark Grey. Available in Mid Grey and Dark Grey to suit different studio interior schemes. Both colourways are available from stock and shipped uncompressed to maintain tile integrity in transit.

Made in the UK — shipped uncompressed. All Wedge PRO packs are manufactured in the Advanced Acoustics UK facility and shipped uncompressed, ensuring tiles arrive in full-dimension condition ready for installation.

Installation

Plan the tile layout before beginning installation. Sketch the intended pattern on paper and mark the layout on the wall or ceiling surface using pencil, masking tape, or a laser level. Distribute tiles evenly across the treatment area rather than concentrating them in a single large cluster; even distribution provides more consistent absorption coverage across the room.

Apply Advanced Acoustics Contact Adhesive to both the back of the tile and the mounting surface. Apply a band of adhesive around the perimeter of the tile and 50–75% coverage of the remaining surface area; repeat the equivalent coverage on the wall. Allow the adhesive to become touch-dry before bringing the surfaces together — contact adhesive bonds on contact, so position the tile carefully before pressing it to the wall. Avoid overspray onto the tile face or surrounding wall surface; use masking tape on the wall to protect adjacent areas. If adhesive webbing contacts the tile face, allow it to dry fully before attempting to remove it — in most cases it can be peeled away cleanly once dry.

The adhesive is solvent-based. Ensure adequate ventilation throughout the installation — keep doors and windows open.

For a temporary or demountable installation, mount tiles onto 6mm MDF or plywood sheet to create panels, then hang the panels using D-rings and picture hooks. For ceiling-mounted panels, use four mirror plates per panel. This approach allows panels to be removed and repositioned without damage to the wall or ceiling surface.

The Technical Details

Performance Data