Revolutionize Your Acoustics with the Quadrant Bass Trap Corner Kit
The Advanced Acoustics Quadrant Corner Bass Trap Kit is a complete tri-corner treatment package combining three Quadrant Corner Bass Traps 3ft with one complimentary Bass Trap Corner Fill. The three 3ft Quadrant Bass Traps measure 305mm × 305mm × 915mm (12" × 12" × 36"); the Bass Trap Corner Fill measures 305mm × 305mm × 305mm (12" × 12" × 12").
The Quadrant Corner Bass Trap Kit provides the components to treat one tri-corner fully in a single purchase. The Bass Trap Corner Fill cube seats in the tri-corner — the junction where two walls and the ceiling meet — and the three 3ft Bass Traps run off from the cube in the three directions, along the two wall edges and the ceiling edge that converge at the tri-corner.
Equivalent Absorption Area per object (combined): 0.9 at 50Hz, 1.8 at 63Hz, 1.6 at 80Hz, 2.4 at 100Hz, 2.1 at 125Hz, and 2.3 at 160Hz. The Quadrant profile — a quarter-circle cross-section designed to fit the internal geometry of a room corner — pairs with the AeroFoil 12" tile family, allowing the kit to be installed alongside AeroFoil wall tiles for a coordinated acoustic treatment package. Available in Mid Grey and Dark Grey. Manufactured in the UK.
What's Included
3 × Quadrant Corner Bass Traps 3ft — 305mm × 305mm × 915mm (12" × 12" × 36").
1 × Bass Trap Corner Fill — 305mm × 305mm × 305mm (12" × 12" × 12").
Jump to: Applications • Product Benefits • Installation • FAQs • Technical Details
Applications
Professional recording studios and control rooms — tri-corner treatment.
The Quadrant Corner Bass Trap Kit treats one tri-corner fully. The tri-corner is the point of greatest low-frequency energy accumulation in a room, and the kit provides the components to address it comprehensively. Pair with AeroFoil wall tiles for a coordinated treatment package. Use the Coverage Calculator to determine the number of kits required — most rooms have four tri-corners, so four kits treat all four comprehensively.
Rehearsal rooms and live rooms — tri-corner low-frequency control.
The kit's combined Equivalent Absorption Area — 2.4 at 100Hz, 2.1 at 125Hz, and 2.3 at 160Hz — addresses the low-frequency build-up that contributes to muddiness in musical performance. Treating the tri-corners first establishes the foundation for the rest of the acoustic treatment.
Coordinated treatment with AeroFoil family tiles.
The Quadrant profile of the bass traps pairs with the AeroFoil 12" tile family, allowing the kit to be installed alongside AeroFoil wall tiles for a coordinated acoustic treatment package with a consistent visual finish across walls, corners, and tri-corners.
Product Benefits
Complete tri-corner treatment — cube in the tri-corner, three 3ft traps running off in three directions.
The Quadrant Corner Bass Trap Kit provides the components to treat one tri-corner fully in a single purchase. The Bass Trap Corner Fill cube seats in the tri-corner junction, and the three 3ft Bass Traps run off from the cube in the three directions — along the two wall edges and the ceiling edge that converge at the tri-corner.
Quadrant profile — corner-fitting geometry.
The CNC-cut quadrant profile — a quarter-circle cross-section — is designed to fit the internal geometry of a room corner, producing a clean, curved installation that integrates with the corner structure. The profile pairs with the AeroFoil tile family for a consistent visual finish across walls, corners, and tri-corners.
Specification and compliance.
30kg/m³ foam density. Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989). 3ft bass trap size 305mm × 305mm × 915mm (12" × 12" × 36"). Corner Fill size 305mm × 305mm × 305mm (12" × 12" × 12"). 3 × 3ft traps + 1 × Corner Fill per kit. Mid Grey and Dark Grey. Manufactured in the UK and shipped uncompressed from stock.
Installation
Installing our Corner Foam Bass Traps is very simple. The first step to take is to work out your correct placement and preferred layout of bass traps. Do a sketch on paper first to make sure that the layout looks right and you have enough bass traps and space for your planned design.
Once the acoustic foam bass traps are mounted they are hard to remove so it is important to get the layout right before you begin. Once you have a sketch of the layout you plan you can then mark up the wall with the layout. You can either use pencil, masking tape or lasers to layout the design.
When mounting the bass traps in the corners apply Advanced Acoustics Contact Adhesive to both the back of the bass trap and the mounting surface. There is no need to heavily cover the bass trap or wall with adhesive, a band of adhesive around the perimeter of the bass trap along with 50% - 75% coverage of the rest of the bass trap will be fine. Use the same equivalent amount on the wall. Avoid overspray on the bass traps and the corners so that adhesive can’t be seen when they are in place. Masking Tape on the wall will help with this. If you do get webbing overspray on the bass trap, don’t touch it, allow it to dry, in most cases you will be able to peel the adhesive off.
The adhesive we supply is solvent based so we recommend that you keep all doors of the room and any windows open whilst completing the installation.
Frequently Asked Questions
Is the kit better value than buying the parts separately?
Yes. The kit costs less than buying the three 3ft traps and a Corner Fill individually, and it arrives as one matched set sized to treat a complete tri-corner. Choose individual traps instead if you want a different mix of lengths or are building a corner a piece at a time.
Can I extend the kit later?
Yes. The kit traps are 305mm modules designed to stack. To extend a corner, add 2ft or 3ft singles in the same profile and colour. This makes the kit a good first step: start with one tri-corner and build outwards.
Will bass traps stop bass travelling through walls to my neighbours?
No. Bass traps absorb low-frequency energy inside the room, which reduces boom and uneven bass at the listening position. They don't stop sound passing through walls, floors or ceilings. Reducing what a neighbour hears needs mass and decoupling, such as Mass Loaded Vinyl, acoustic plasterboard and resilient bars or clips. Sort that first if it's your problem, then add bass traps to improve how the room itself sounds.
Does the profile (Wedge, Wave, Quadrant or Original) change the performance?
All four are 30kg/m³ polyurethane foam and perform very similarly. At 160Hz every 3ft profile measures 0.9. The small differences are lower down. The Quadrant is the heaviest profile at both lengths (2.8kg for a 3ft, against 1.6kg for the Wedge and Wave) and measures a little higher at 63–80Hz (0.4 and 0.3). The Wave measures highest at 100Hz (0.7). For most rooms, choose the profile that matches your wall tiles. If the lowest frequencies are your priority, the Quadrant has a slight edge.
What if one kit doesn't make enough difference?
All products carry a 30-day money-back guarantee. One kit treats one tri-corner, and most rooms have several, so the improvement grows as you treat more corners. If it hasn't helped enough, contact us with your room dimensions and we'll advise on where to add treatment before you consider a return. Call 01623 643609 or email info@advancedacoustics-uk.com.
The Technical Details
| Product Name | Quadrant Corner Bass Trap Kit |
| Kit Contents |
3No. 3ft Quadrant Bass Traps 1No. Bass Trap Corner Fill |
| Equivalent Absorption Area Per Object at 50Hz | 0.9 |
| Equivalent Absorption Area Per Object at 63Hz | 1.8 |
| Equivalent Absorption Area Per Object at 80Hz | 1.6 |
| Equivalent Absorption Area Per Object at 100Hz | 2.4 |
| Equivalent Absorption Area Per Object at 125Hz | 2.1 |
| Equivalent Absorption Area Per Object at 160Hz | 2.3 |
| Product Colour | Mid Grey or Dark Grey |
| Product Weight | 9.2kg |
| Fire Classification | Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989) |
| Acoustic Foam Density | 30kg/m3 |
Performance Data
