12" MiniWave Acoustic Foam Tile Pack
The Advanced Acoustics Mini Wave 12" is a 60mm open-cell polyurethane acoustic foam tile in a precision CNC-cut wave profile, measuring 305 × 305mm. Each pack contains 12 tiles, covering 1.11m² (12ft²) of wall or ceiling surface. At 60mm, the Mini Wave sits in the upper tier of the Advanced Acoustics 12" range — deeper than the 40mm entry-level profiles and comparable in depth to the 55mm Tegular and Baby HexaTile. The wave profile creates a continuous undulating surface across the tile face, varying the angle of incidence at which sound strikes the foam and distributing absorption more evenly across the tile surface than flat-faced profiles. Available in Mid Grey and Dark Grey. Manufactured in the UK.
Applications
Recording studios and control rooms — flutter echo and reverberation control.
Flutter echo between parallel reflective surfaces is the primary acoustic problem in untreated recording and control room environments. The 60mm Mini Wave provides effective broadband absorption across the mid and high frequency range, reducing flutter echo and shortening reverberation time at the recording and monitoring position. The wave profile's varied surface geometry distributes absorption across a range of angles, making it effective at controlling reflections arriving from different directions. Install on the primary reflection points — side walls, rear wall, and ceiling — to achieve even absorption coverage throughout the room. Use the Coverage Calculator tab to determine the number of packs required.
Vocal booths and isolation rooms.
Vocal booths require effective absorption across the vocal frequency range to prevent the tight, coloured sound produced by reflections in a small enclosed space. The 60mm depth of the Mini Wave provides effective absorption at the frequencies most critical for vocal recording, reducing the coloration introduced by room reflections and producing a cleaner vocal capture. The wave profile's undulating surface suits the aesthetic of professional vocal booth installations where a more refined finish than standard wedge or pyramid foam is preferred.
Home studios and podcast recording spaces.
In smaller rooms, untreated parallel surfaces create a reverberant, coloured sound that is picked up by microphones alongside the source signal, reducing recording clarity and requiring additional post-processing to correct. The 60mm Mini Wave provides sufficient absorption depth to control mid and high frequency reverberation in typical home studio dimensions. The wave profile suits home studio environments where a distinctive, contemporary aesthetic is preferred alongside effective acoustic treatment.
Rehearsal rooms and live rooms.
Rehearsal rooms benefit from controlled reverberation at mid and high frequencies to reduce the build-up of reflected sound energy that makes it difficult for musicians to hear each other clearly. The 60mm Mini Wave provides effective absorption at the frequencies most responsible for this build-up, reducing reverberation time and improving the acoustic environment for performance and rehearsal.
Mixing and mastering rooms — supplementary treatment.
In mixing and mastering environments where low-frequency room treatment is addressed by dedicated bass traps, the Mini Wave can be used to supplement mid and high-frequency absorption on wall and ceiling surfaces. The wave profile's varied surface geometry reduces specular reflections at the monitoring position, contributing to a more controlled listening environment for critical mixing decisions.
Product Benefits
Wave profile — varied surface geometry for distributed absorption.
The CNC-cut wave profile creates a continuous undulating surface across the tile face, varying the angle at which sound strikes the foam across the tile area. This distributes absorption more evenly than flat-faced profiles and reduces specular reflections from the tile surface. Each tile is cut using CNC machinery to ensure consistent wave dimensions across every tile in the pack, allowing accurate alignment without adjustment during installation.
60mm depth — upper-tier absorption in the standard 12" range.
At 60mm, the Mini Wave is one of the deeper tiles in the standard Advanced Acoustics 12" range, providing greater absorption depth than 40mm entry-level profiles. The additional depth improves absorption in the lower-mid frequency range relative to thinner tiles, making the Mini Wave effective across a broader frequency range than standard 40mm profiles.
High-density polyurethane foam — 30kg/m³, fire rated.
The foam core is manufactured at 30kg/m³ density, providing greater structural integrity and longer service life than lower-density acoustic foam. Higher density foam maintains its shape and acoustic performance over time without the compression and degradation that affects lower-density products. The foam meets Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (Fire)(Safety) Regulations 1988 (amended 1989).
12 tiles per pack — 1.11m² coverage.
Each pack contains 12 tiles at 305 × 305mm, providing 1.11m² (12ft²) of coverage. Use the Coverage Calculator tab to determine the number of packs required for your room dimensions and room type before ordering.
Two colourways — Mid Grey and Dark Grey.
Available in Mid Grey and Dark Grey to suit different studio interior schemes. Both colourways are available from stock and shipped uncompressed to maintain tile integrity in transit.
Made in the UK — shipped uncompressed.
All Mini Wave 12" packs are manufactured in the Advanced Acoustics UK facility and shipped uncompressed, ensuring tiles arrive in full-dimension condition ready for installation.
Installation
Plan the tile layout before beginning installation. Sketch the intended pattern on paper and mark the layout on the wall or ceiling surface using pencil, masking tape, or a laser level. Distribute tiles evenly across the treatment area rather than concentrating them in a single large cluster; even distribution provides more consistent absorption coverage across the room.
Apply Advanced Acoustics Contact Adhesive to both the back of the tile and the mounting surface. Apply a band of adhesive around the perimeter of the tile and 50–75% coverage of the remaining surface area; repeat the equivalent coverage on the wall. Allow the adhesive to become touch-dry before bringing the surfaces together — contact adhesive bonds on contact, so position the tile carefully before pressing it to the wall. Avoid overspray onto the tile face or surrounding wall surface; use masking tape on the wall to protect adjacent areas. If adhesive webbing contacts the tile face, allow it to dry fully before attempting to remove it — in most cases it can be peeled away cleanly once dry. The adhesive is solvent-based. Ensure adequate ventilation throughout the installation — keep doors and windows open.
For a temporary or demountable installation, mount tiles onto 6mm MDF or plywood sheet to create panels, then hang the panels using D-rings and picture hooks. For ceiling-mounted panels, use four mirror plates per panel. This approach allows panels to be removed and repositioned without damage to the wall or ceiling surface.
The Technical Details
| Product Name | Mini Wave 12" Acoustic Tile Pack |
| Product Size | 12" x 12" x 2 3/8" (305mm x 305mm x 60mm) |
| Tiles Per Pack |
12 |
| Area Covered Per Pack | 12sqft (1.11sqm) |
| Product Colour | Mid Grey or Dark Grey |
| Product Weight | 1.9kg |
| Fire Classification | Crib 5 and Schedule 1, Part 1 of the Furnishings and Furniture (fire)(safety) Regulations 1988 (amended 1989) |
| Acoustic Foam Density | 30kg/m3 |
